27.08.2020  Linktip 
SWMET_2022
Schema SWMET_2022.xsd


schema location:  SWMET_2022.xsd
attribute form default: 
element form default:  qualified
targetNamespace:  http://dd.eionet.europa.eu/schemas/WFD2022
 
Elements  Complex types 
SWMET  BQEMethod 
SWChemicalStatusClassificationRBD 
SWExemptions 
SWManagementObjectives 
SWMET 
SWMethodologies 
SWPhysicoChemicalQE 
SWPressures 
SWPrioritySubstance 
SWRBSP 
SWSupportingQE 
SWTargetedQ 
SWType 


schema location:  http://dd.eionet.europa.eu/schemas/WFD2022/WFDCommon_2022.xsd
attribute form default: 
element form default: 
targetNamespace:  http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
 
Simple types 
FeatureUniqueEUCodeType 
NonNegativeDecimalType 
PositiveDecimalType 
String1000Type 
String100Type 
String10Type 
String20Type 
String2500Type 
String250Type 
String254Type 
String25Type 
String4000Type 
String50Type 
URLType 
WiseDate 
WiseDateTime 
WiseDateTimeType 
WiseLanguageCode_Enum 
WiseYear 
WiseYearMonth 


element SWMET
diagram SWMET_2022_p1.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SWMET
properties
content complex
children countryCode 1..1 euRBDCode SWType SWMethodologies BQEMethod SWSupportingQE SWPhysicoChemicalQE SWRBSP SWTargetedQ SWPrioritySubstance SWChemicalStatusClassificationRBD SWManagementObjectives SWPressures SWExemptions
annotation
documentation
Reporting of methodologies for surface water bodies is done for each RBD.
source <xs:element name="SWMET" type="SWMET">
 
<xs:annotation>
   
<xs:documentation>Reporting of methodologies for surface water bodies is done for each RBD. </xs:documentation>
 
</xs:annotation>
</xs:element>

complexType BQEMethod
diagram SWMET_2022_p2.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
children bqeMethodName bqeCode bqeCategoryRW bqeCategoryLW bqeCategoryTW bqeCategoryCW bqePercentageOfTypes bqeSensitivityImpactNutrients bqeSensitivityImpactOrganic bqeSensitivityImpactChemical bqeSensitivityImpactSaline bqeSensitivityImpactAcidification bqeSensitivityImpactTemperature bqeSensitivityImpactHydrological bqeSensitivityImpactMorphological bqeSensitivityImpactOther
used by
element SWMET/BQEMethod
annotation
documentation
Report information on assessment methods for supporting QEs. Report the whole class once for each supporting QE that has been assessed.
source <xs:complexType name="BQEMethod">
 
<xs:annotation>
   
<xs:documentation>Report information on assessment methods for supporting QEs. Report the whole class once for each supporting QE that has been assessed. </xs:documentation>
 
</xs:annotation>
 
<xs:sequence>
   
<xs:element name="bqeMethodName" type="String250Type">
     
<xs:annotation>
       
<xs:documentation>Required. Provide the name of the assessment method. The name must be the same that is used in the RBMPs and background documents.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bqeCode" type="BQE_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Select the BQE for which the assessment method applies.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bqeCategoryRW" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Does the assessment method apply to rivers?</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bqeCategoryLW" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Does the assessment method apply to lakes?</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bqeCategoryTW" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Does the assessment method apply to transitional waters?</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bqeCategoryCW" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Does the assessment method apply to coastal waters?</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bqePercentageOfTypes" type="NumberDecimal0100Type">
     
<xs:annotation>
       
<xs:documentation>Required. Report the percentage of types for this BQE and category for which an assessment method is fully developed.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bqeSensitivityImpactNutrients" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Is the assessment method mainly sensitive to nutrient pollution?</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bqeSensitivityImpactOrganic" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Is the assessment method mainly sensitive to organic pollution?</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bqeSensitivityImpactChemical" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Is the assessment method mainly sensitive to chemical pollution?</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bqeSensitivityImpactSaline" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Is the assessment method mainly sensitive to saline pollution?</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bqeSensitivityImpactAcidification" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Is the assessment method mainly sensitive to acidification?</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bqeSensitivityImpactTemperature" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Is the assessment method mainly sensitive to elevated temperatures?</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bqeSensitivityImpactHydrological" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Is the assessment method mainly sensitive to altered habitats due to hydrological changes?</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bqeSensitivityImpactMorphological" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Is the assessment method mainly sensitive to altered habitats due to morphological changes?</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bqeSensitivityImpactOther" type="String100Type" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Optional. If relevant, report any other impact to which the assessment method is mainly sensitive that is not covered in the previous questions.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
 
</xs:sequence>
</xs:complexType>

element BQEMethod/bqeMethodName
diagram SWMET_2022_p3.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type String250Type
properties
isRef 0
annotation
documentation
Required. Provide the name of the assessment method. The name must be the same that is used in the RBMPs and background documents.
source <xs:element name="bqeMethodName" type="String250Type">
 
<xs:annotation>
   
<xs:documentation>Required. Provide the name of the assessment method. The name must be the same that is used in the RBMPs and background documents.</xs:documentation>
 
</xs:annotation>
</xs:element>

element BQEMethod/bqeCode
diagram SWMET_2022_p4.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type BQE_Enum
properties
isRef 0
annotation
documentation
Required. Select the BQE for which the assessment method applies.
source <xs:element name="bqeCode" type="BQE_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Select the BQE for which the assessment method applies.</xs:documentation>
 
</xs:annotation>
</xs:element>

element BQEMethod/bqeCategoryRW
diagram SWMET_2022_p5.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Does the assessment method apply to rivers?
source <xs:element name="bqeCategoryRW" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Does the assessment method apply to rivers?</xs:documentation>
 
</xs:annotation>
</xs:element>

element BQEMethod/bqeCategoryLW
diagram SWMET_2022_p6.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Does the assessment method apply to lakes?
source <xs:element name="bqeCategoryLW" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Does the assessment method apply to lakes?</xs:documentation>
 
</xs:annotation>
</xs:element>

element BQEMethod/bqeCategoryTW
diagram SWMET_2022_p7.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Does the assessment method apply to transitional waters?
source <xs:element name="bqeCategoryTW" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Does the assessment method apply to transitional waters?</xs:documentation>
 
</xs:annotation>
</xs:element>

element BQEMethod/bqeCategoryCW
diagram SWMET_2022_p8.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Does the assessment method apply to coastal waters?
source <xs:element name="bqeCategoryCW" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Does the assessment method apply to coastal waters?</xs:documentation>
 
</xs:annotation>
</xs:element>

element BQEMethod/bqePercentageOfTypes
diagram SWMET_2022_p9.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type NumberDecimal0100Type
properties
isRef 0
annotation
documentation
Required. Report the percentage of types for this BQE and category for which an assessment method is fully developed.
source <xs:element name="bqePercentageOfTypes" type="NumberDecimal0100Type">
 
<xs:annotation>
   
<xs:documentation>Required. Report the percentage of types for this BQE and category for which an assessment method is fully developed.</xs:documentation>
 
</xs:annotation>
</xs:element>

element BQEMethod/bqeSensitivityImpactNutrients
diagram SWMET_2022_p10.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Is the assessment method mainly sensitive to nutrient pollution?
source <xs:element name="bqeSensitivityImpactNutrients" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Is the assessment method mainly sensitive to nutrient pollution?</xs:documentation>
 
</xs:annotation>
</xs:element>

element BQEMethod/bqeSensitivityImpactOrganic
diagram SWMET_2022_p11.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Is the assessment method mainly sensitive to organic pollution?
source <xs:element name="bqeSensitivityImpactOrganic" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Is the assessment method mainly sensitive to organic pollution?</xs:documentation>
 
</xs:annotation>
</xs:element>

element BQEMethod/bqeSensitivityImpactChemical
diagram SWMET_2022_p12.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Is the assessment method mainly sensitive to chemical pollution?
source <xs:element name="bqeSensitivityImpactChemical" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Is the assessment method mainly sensitive to chemical pollution?</xs:documentation>
 
</xs:annotation>
</xs:element>

element BQEMethod/bqeSensitivityImpactSaline
diagram SWMET_2022_p13.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Is the assessment method mainly sensitive to saline pollution?
source <xs:element name="bqeSensitivityImpactSaline" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Is the assessment method mainly sensitive to saline pollution?</xs:documentation>
 
</xs:annotation>
</xs:element>

element BQEMethod/bqeSensitivityImpactAcidification
diagram SWMET_2022_p14.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Is the assessment method mainly sensitive to acidification?
source <xs:element name="bqeSensitivityImpactAcidification" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Is the assessment method mainly sensitive to acidification?</xs:documentation>
 
</xs:annotation>
</xs:element>

element BQEMethod/bqeSensitivityImpactTemperature
diagram SWMET_2022_p15.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Is the assessment method mainly sensitive to elevated temperatures?
source <xs:element name="bqeSensitivityImpactTemperature" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Is the assessment method mainly sensitive to elevated temperatures?</xs:documentation>
 
</xs:annotation>
</xs:element>

element BQEMethod/bqeSensitivityImpactHydrological
diagram SWMET_2022_p16.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Is the assessment method mainly sensitive to altered habitats due to hydrological changes?
source <xs:element name="bqeSensitivityImpactHydrological" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Is the assessment method mainly sensitive to altered habitats due to hydrological changes?</xs:documentation>
 
</xs:annotation>
</xs:element>

element BQEMethod/bqeSensitivityImpactMorphological
diagram SWMET_2022_p17.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Is the assessment method mainly sensitive to altered habitats due to morphological changes?
source <xs:element name="bqeSensitivityImpactMorphological" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Is the assessment method mainly sensitive to altered habitats due to morphological changes?</xs:documentation>
 
</xs:annotation>
</xs:element>

element BQEMethod/bqeSensitivityImpactOther
diagram SWMET_2022_p18.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type String100Type
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Optional. If relevant, report any other impact to which the assessment method is mainly sensitive that is not covered in the previous questions.
source <xs:element name="bqeSensitivityImpactOther" type="String100Type" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Optional. If relevant, report any other impact to which the assessment method is mainly sensitive that is not covered in the previous questions.</xs:documentation>
 
</xs:annotation>
</xs:element>

complexType SWChemicalStatusClassificationRBD
diagram SWMET_2022_p19.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
children approachSWBNotMonitoredChemicalReference limitOfQuantification backgroundConcentrations backgroundConcentrationsReference bioavailability bioavailabilityReference longTermTrendAnalysis longTermTrendAnalysisReference mixingZoneMethodology alternativeMixingZoneMethodologyReference mixingZoneMeasures mixingZoneMeasuresReductionReference chemicalStatusReference
used by
element SWMET/SWChemicalStatusClassificationRBD
annotation
documentation
Report information on the methodology for the classification of chemical status at the level of the RBD.
source <xs:complexType name="SWChemicalStatusClassificationRBD">
 
<xs:annotation>
   
<xs:documentation>Report information on the methodology for the classification of chemical status at the level of the RBD. </xs:documentation>
 
</xs:annotation>
 
<xs:sequence>
   
<xs:element name="approachSWBNotMonitoredChemicalReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Conditional. If the assessment of chemical status of surface water bodies which have not been monitored is derived or extrapolated from monitoring in other comparable surface water bodies, provide references or hyperlinks to technical documents describing how the assessment of chemical status was carried out. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if SWB/SurfaceWaterBody/swChemicalMonitoringResults is ‘Grouping’ or ‘Combination monitoring/grouping’ for at least one surface water body in this RBD.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="limitOfQuantification" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether the method used for dealing with measurements lower than the limit of quantification is as specified in Article 5 of the QA/QC Directive (2009/90/EC).</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="backgroundConcentrations" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether natural background concentrations for metals and their compounds are taken into consideration where such concentrations prevent compliance with the relevant EQS.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="backgroundConcentrationsReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Conditional. If natural background concentrations for metals and their compounds are taken into consideration where such concentrations prevent compliance with the relevant EQS, provide references or hyperlinks to technical documents where further specific information can be found, particularly the list of metals concerned. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if backgroundConcentrations is ‘Yes’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bioavailability" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>: Required. Indicate whether hardness, pH, dissolved organic carbon or other water quality parameters that affect the bioavailability of metals are taken into consideration when assessing monitoring results against relevant EQSs.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bioavailabilityReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Conditional. If water quality parameters affecting the bioavailability of metals are taken into consideration when assessing monitoring results against relevant EQSs, provide references or hyperlinks to technical documents where further specific information can be found, particularly the list of metals concerned. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if bioavailability is ‘Yes’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="longTermTrendAnalysis" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether arrangements are in place for the long-term trend analysis of concentrations of those Priority Substances listed in Part A of Annex I of Directive 2008/105/EC78 that tend to accumulate in sediment and/or biota (Article 3(3) EQSD).</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="longTermTrendAnalysisReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Conditional. If arrangements are in place for the long-term trend analysis of concentrations of those Priority Substances listed in Part A of Annex I of Directive 2008/105/EC that tend to accumulate in sediment and/or biota, provide references or hyperlinks to technical documents where further specific information can be found, particularly the list of Priority Substances concerned. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if longTermTrendAnalysis is ‘Yes’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="mixingZoneMethodology" type="YesNoCode_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. If mixing zones were designated in this RBD, indicate whether the methodology for their designation follows the tiered approach as laid down in the ’Technical Background Document on Identification of Mixing Zones’79.
Quality checks: Conditional check: Report if and only if SWB/SurfaceWaterBody/swMixingZones is ‘Yes’ for at least one surface water body in this RBD.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="alternativeMixingZoneMethodologyReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Conditional. If the methodology for the designation of Mixing Zones in this RBD does not follow the tiered approach as laid down in the ’Technical Background Document on Identification of Mixing Zones’, provide references or hyperlinks to technical documents describing the alternative methodology applied. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if mixingZoneMethodology is ‘No’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="mixingZoneMeasures" type="MixingZoneMeasures_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. If mixing zones were designated in this RBD, indicate the measures taken with a view to reducing the extent of Mixing Zones in the future.
Quality checks: Conditional check: Report if and only if SWB/SurfaceWaterBody/swMixingZones is ‘Yes’ for at least one surface water body in this RBD.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="mixingZoneMeasuresReductionReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Conditional. If mixing zones were designated in this RBD, provide references or hyperlinks to documents describing the measures taken with a view to reducing the extent of Mixing Zones in the future. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if SWB/SurfaceWaterBody/swMixingZones is ‘Yes’ for at least one surface water body in this RBD.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="chemicalStatusReference" type="ReferenceType" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Provide references or hyperlinks to documents describing the methodology for the assessment of chemical status. Guidance on what should be included in this document is provided in Section 7.4.3.2.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
 
</xs:sequence>
</xs:complexType>

element SWChemicalStatusClassificationRBD/approachSWBNotMonitoredChemicalReference
diagram SWMET_2022_p20.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 0
maxOcc unbounded
annotation
documentation
Conditional. If the assessment of chemical status of surface water bodies which have not been monitored is derived or extrapolated from monitoring in other comparable surface water bodies, provide references or hyperlinks to technical documents describing how the assessment of chemical status was carried out. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if SWB/SurfaceWaterBody/swChemicalMonitoringResults is ‘Grouping’ or ‘Combination monitoring/grouping’ for at least one surface water body in this RBD.
source <xs:element name="approachSWBNotMonitoredChemicalReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Conditional. If the assessment of chemical status of surface water bodies which have not been monitored is derived or extrapolated from monitoring in other comparable surface water bodies, provide references or hyperlinks to technical documents describing how the assessment of chemical status was carried out. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if SWB/SurfaceWaterBody/swChemicalMonitoringResults is ‘Grouping’ or ‘Combination monitoring/grouping’ for at least one surface water body in this RBD.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWChemicalStatusClassificationRBD/limitOfQuantification
diagram SWMET_2022_p21.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether the method used for dealing with measurements lower than the limit of quantification is as specified in Article 5 of the QA/QC Directive (2009/90/EC).
source <xs:element name="limitOfQuantification" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether the method used for dealing with measurements lower than the limit of quantification is as specified in Article 5 of the QA/QC Directive (2009/90/EC).</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWChemicalStatusClassificationRBD/backgroundConcentrations
diagram SWMET_2022_p22.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether natural background concentrations for metals and their compounds are taken into consideration where such concentrations prevent compliance with the relevant EQS.
source <xs:element name="backgroundConcentrations" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether natural background concentrations for metals and their compounds are taken into consideration where such concentrations prevent compliance with the relevant EQS.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWChemicalStatusClassificationRBD/backgroundConcentrationsReference
diagram SWMET_2022_p23.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 0
maxOcc unbounded
annotation
documentation
Conditional. If natural background concentrations for metals and their compounds are taken into consideration where such concentrations prevent compliance with the relevant EQS, provide references or hyperlinks to technical documents where further specific information can be found, particularly the list of metals concerned. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if backgroundConcentrations is ‘Yes’.
source <xs:element name="backgroundConcentrationsReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Conditional. If natural background concentrations for metals and their compounds are taken into consideration where such concentrations prevent compliance with the relevant EQS, provide references or hyperlinks to technical documents where further specific information can be found, particularly the list of metals concerned. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if backgroundConcentrations is ‘Yes’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWChemicalStatusClassificationRBD/bioavailability
diagram SWMET_2022_p24.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
: Required. Indicate whether hardness, pH, dissolved organic carbon or other water quality parameters that affect the bioavailability of metals are taken into consideration when assessing monitoring results against relevant EQSs.
source <xs:element name="bioavailability" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>: Required. Indicate whether hardness, pH, dissolved organic carbon or other water quality parameters that affect the bioavailability of metals are taken into consideration when assessing monitoring results against relevant EQSs.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWChemicalStatusClassificationRBD/bioavailabilityReference
diagram SWMET_2022_p25.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 0
maxOcc unbounded
annotation
documentation
Conditional. If water quality parameters affecting the bioavailability of metals are taken into consideration when assessing monitoring results against relevant EQSs, provide references or hyperlinks to technical documents where further specific information can be found, particularly the list of metals concerned. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if bioavailability is ‘Yes’.
source <xs:element name="bioavailabilityReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Conditional. If water quality parameters affecting the bioavailability of metals are taken into consideration when assessing monitoring results against relevant EQSs, provide references or hyperlinks to technical documents where further specific information can be found, particularly the list of metals concerned. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if bioavailability is ‘Yes’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWChemicalStatusClassificationRBD/longTermTrendAnalysis
diagram SWMET_2022_p26.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether arrangements are in place for the long-term trend analysis of concentrations of those Priority Substances listed in Part A of Annex I of Directive 2008/105/EC78 that tend to accumulate in sediment and/or biota (Article 3(3) EQSD).
source <xs:element name="longTermTrendAnalysis" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether arrangements are in place for the long-term trend analysis of concentrations of those Priority Substances listed in Part A of Annex I of Directive 2008/105/EC78 that tend to accumulate in sediment and/or biota (Article 3(3) EQSD).</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWChemicalStatusClassificationRBD/longTermTrendAnalysisReference
diagram SWMET_2022_p27.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 0
maxOcc unbounded
annotation
documentation
Conditional. If arrangements are in place for the long-term trend analysis of concentrations of those Priority Substances listed in Part A of Annex I of Directive 2008/105/EC that tend to accumulate in sediment and/or biota, provide references or hyperlinks to technical documents where further specific information can be found, particularly the list of Priority Substances concerned. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if longTermTrendAnalysis is ‘Yes’.
source <xs:element name="longTermTrendAnalysisReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Conditional. If arrangements are in place for the long-term trend analysis of concentrations of those Priority Substances listed in Part A of Annex I of Directive 2008/105/EC that tend to accumulate in sediment and/or biota, provide references or hyperlinks to technical documents where further specific information can be found, particularly the list of Priority Substances concerned. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if longTermTrendAnalysis is ‘Yes’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWChemicalStatusClassificationRBD/mixingZoneMethodology
diagram SWMET_2022_p28.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. If mixing zones were designated in this RBD, indicate whether the methodology for their designation follows the tiered approach as laid down in the ’Technical Background Document on Identification of Mixing Zones’79.
Quality checks: Conditional check: Report if and only if SWB/SurfaceWaterBody/swMixingZones is ‘Yes’ for at least one surface water body in this RBD.
source <xs:element name="mixingZoneMethodology" type="YesNoCode_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. If mixing zones were designated in this RBD, indicate whether the methodology for their designation follows the tiered approach as laid down in the ’Technical Background Document on Identification of Mixing Zones’79.
Quality checks: Conditional check: Report if and only if SWB/SurfaceWaterBody/swMixingZones is ‘Yes’ for at least one surface water body in this RBD.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWChemicalStatusClassificationRBD/alternativeMixingZoneMethodologyReference
diagram SWMET_2022_p29.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 0
maxOcc unbounded
annotation
documentation
Conditional. If the methodology for the designation of Mixing Zones in this RBD does not follow the tiered approach as laid down in the ’Technical Background Document on Identification of Mixing Zones’, provide references or hyperlinks to technical documents describing the alternative methodology applied. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if mixingZoneMethodology is ‘No’.
source <xs:element name="alternativeMixingZoneMethodologyReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Conditional. If the methodology for the designation of Mixing Zones in this RBD does not follow the tiered approach as laid down in the ’Technical Background Document on Identification of Mixing Zones’, provide references or hyperlinks to technical documents describing the alternative methodology applied. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if mixingZoneMethodology is ‘No’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWChemicalStatusClassificationRBD/mixingZoneMeasures
diagram SWMET_2022_p30.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type MixingZoneMeasures_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. If mixing zones were designated in this RBD, indicate the measures taken with a view to reducing the extent of Mixing Zones in the future.
Quality checks: Conditional check: Report if and only if SWB/SurfaceWaterBody/swMixingZones is ‘Yes’ for at least one surface water body in this RBD.
source <xs:element name="mixingZoneMeasures" type="MixingZoneMeasures_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. If mixing zones were designated in this RBD, indicate the measures taken with a view to reducing the extent of Mixing Zones in the future.
Quality checks: Conditional check: Report if and only if SWB/SurfaceWaterBody/swMixingZones is ‘Yes’ for at least one surface water body in this RBD.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWChemicalStatusClassificationRBD/mixingZoneMeasuresReductionReference
diagram SWMET_2022_p31.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 0
maxOcc unbounded
annotation
documentation
Conditional. If mixing zones were designated in this RBD, provide references or hyperlinks to documents describing the measures taken with a view to reducing the extent of Mixing Zones in the future. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if SWB/SurfaceWaterBody/swMixingZones is ‘Yes’ for at least one surface water body in this RBD.
source <xs:element name="mixingZoneMeasuresReductionReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Conditional. If mixing zones were designated in this RBD, provide references or hyperlinks to documents describing the measures taken with a view to reducing the extent of Mixing Zones in the future. Guidance on what should be included in this document is provided in Section 7.4.3.2.
Quality checks: Conditional check: Report if and only if SWB/SurfaceWaterBody/swMixingZones is ‘Yes’ for at least one surface water body in this RBD.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWChemicalStatusClassificationRBD/chemicalStatusReference
diagram SWMET_2022_p32.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Provide references or hyperlinks to documents describing the methodology for the assessment of chemical status. Guidance on what should be included in this document is provided in Section 7.4.3.2.
source <xs:element name="chemicalStatusReference" type="ReferenceType" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Provide references or hyperlinks to documents describing the methodology for the assessment of chemical status. Guidance on what should be included in this document is provided in Section 7.4.3.2.</xs:documentation>
 
</xs:annotation>
</xs:element>

complexType SWExemptions
diagram SWMET_2022_p33.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
children swExemption44Impact swExemption44Driver swExemption45Impact swExemption45Driver swDisproportionateCost swDisproportionateCostScale swDisproportionateCostAnalysis swDisproportionateCostAlternativeFinancing swDisproportionateCostOtherEULegislation swTechnicalInfeasibility swNaturalConditions swExemption46 swExemption47 swExemptionsTransboundary swExemptionsReference driversSWExemptionsReference
used by
element SWMET/SWExemptions
source <xs:complexType name="SWExemptions">
 
<xs:sequence>
   
<xs:element name="swExemption44Impact" type="SignificantImpactType_Enum" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Select from the enumeration list the impacts that are causing the application of exemptions under Article 4(4). More than one impact may be selected. If Article 4(4) exemptions have not been applied report ‘NOTA - Not applicable’.
The option ‘NOSI - No significant impact’ is not valid.
Quality checks: Element check: The option ‘NOSI - No significant impact’ is not valid.
Cross-schema check: The option ‘NOTA – Not applicable’ should be reported if and only if ‘Article 4(4)…’ has not been reported for:
- any surface water body under SWB/SWEcologicalExemptionType/swEcologicalExemptionType, SWB/QualityElement/qeEcologicalExemptionType or SWB/SWChemicalExemptionType/swChemicalExemptionType; and
- any protected area under SWB/SWAssociatedProtectedArea/protectedAreaExemption
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swExemption44Driver" type="Driver_Enum" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Select from the enumeration list the drivers that are causing the application of exemptions under Article 4(4). More than one driver may be selected. If Article 4(4) exemptions have not been applied report ‘Exemption not applied’.
Quality checks: Within-schema check: ‘Exemption not applied’ should be reported if and only if swExemption44Impact is ‘NOTA – Not applicable’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swExemption45Impact" type="SignificantImpactType_Enum" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Select from the enumeration list the impacts that are causing the application of exemptions under Article 4(5). More than one impact may be selected. If Article 4(5) exemptions have not been applied report ‘NOTA - Not applicable’.
The option ‘NOSI - No significant impact’ is not valid.
Quality checks: Element check: The option ‘NOSI - No significant impact’ is not valid.
Cross-schema check: The option ‘NOTA – Not applicable’ should be reported if and only if ‘Article 4(5)…’ has not been reported for:
- any surface water body under SWB/SWEcologicalExemptionType/swEcologicalExemptionType, SWB/QualityElement/qeEcologicalExemptionType or SWB/SWChemicalExemptionType/swChemicalExemptionType; and
- any protected area under SWB/SWAssociatedProtectedArea/protectedAreaExemption
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swExemption45Driver" type="Driver_Enum" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Select from the enumeration list the drivers that are causing the application of exemptions under Article 4(5). More than one driver may be selected. If Article 4(5) exemptions have not been applied report ‘Exemption not applied’.
Quality checks: Within-schema check: ‘Exemption not applied’ should be reported if and only if swExemption45Impact is ‘NOTA – Not applicable’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swDisproportionateCost" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Select from the enumeration list the drivers that are causing the application of exemptions under Article 4(5). More than one driver may be selected. If Article 4(5) exemptions have not been applied report ‘Exemption not applied’.
Quality checks: Within-schema check: ‘Exemption not applied’ should be reported if and only if swExemption45Impact is ‘NOTA – Not applicable’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swDisproportionateCostScale" type="GeographicalScale_Enum" minOccurs="0" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Conditional. Select from the enumeration list the scale(s) at which the calculation of costs was carried out in order to assess disproportionality.
Quality checks: Conditional check: report if and only if swDisproportionateCost is ‘Yes’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swDisproportionateCostAnalysis" type="DisproportionateCostAnalysis_Enum" minOccurs="0" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Conditional. Select from the enumeration list the analysis tools that were used in assessing disproportionate costs. More than one analysis tool may be selected.
Quality checks: Conditional check: report if and only if swDisproportionateCost is ‘Yes’
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swDisproportionateCostAlternativeFinancing" type="DisproportionateCostAlternativeFinancing_Enum" minOccurs="0" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Conditional. Select from the enumeration list the alternative financing options that have been considered to overcome the costs being disproportionate. More than one financing option may be selected.
Quality checks: Conditional check: report if and only if swDisproportionateCost is ‘Yes’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swDisproportionateCostOtherEULegislation" type="YesNoCode_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. Indicate whether the costs of basic measures listed in Article 11(3)(a) of the WFD have been explicitly excluded from the assessment of disproportionate costs.
Quality checks: Conditional check: report if and only if swDisproportionateCost is ‘Yes’
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swTechnicalInfeasibility" type="TechnicalInfeasibility_Enum" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Report how ‘technical infeasibility’ has been interpreted in the context of application of exemptions for surface water bodies. More than one option may be selected.
Quality checks: Within-schema check: the option ‘Technical infeasibility has not been used as a reason for exemption’ is not compatible with any other.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swNaturalConditions" type="SWNaturalConditions_Enum" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Select from the enumeration list the elements considered when determining that natural conditions require an exemption under Article 4(4).
Quality checks: Within-schema check: the option ‘Natural condition has not been used as a reason for exemption for surface water bodies’ is not compatible with any other.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swExemption46" type="Exemption46_Enum" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Select from the enumeration list the reasons that have led to the application of exemptions under Article 4(6). More than one reason may be selected.
Quality checks: Within-schema check: the option ‘Article 4(6) has not been applied’ is not compatible with any other.
Cross-schema check: The option ‘Article 4(6) has not been applied’ should be reported if and only if ‘Article 4(6)…’ has not been reported for:
- any surface water body under SWB/SWEcologicalExemptionType/swEcologicalExemptionType, SWB/QualityElement/qeEcologicalExemptionType or SWB/SWChemicalExemptionType/swChemicalExemptionType; and
- any protected area under SWB/SWAssociatedProtectedArea/protectedAreaExemption
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swExemption47" type="Exemption47_Enum" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Select from the enumeration list the modifications that have led to the application of exemptions under Article 4(7). More than one modification may be selected.
Quality checks: Within-schema check: the option ‘Article 4(7) has not been applied’ is not compatible with any other.
Cross-schema check: The option ‘Article 4(7) has not been applied’ should be reported if and only if ‘Article 4(7)…’ has not been reported for:
- any surface water body under SWB/SWEcologicalExemptionType/swEcologicalExemptionType, SWB/QualityElement/qeEcologicalExemptionType or SWB/SWChemicalExemptionType/swChemicalExemptionType; and
- any protected area under SWB/SWAssociatedProtectedArea/protectedAreaExemption
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swExemptionsTransboundary" type="YesNoNotApplicable_Union_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether the application of exemptions for surface waters has been co-ordinated in a transboundary context. Report ‘Not applicable’ if the RBD is not international.
Quality checks: Cross-schema check: Report ‘Not applicable’ if and only if RBDSUCA/RBD/internationalRBD is ‘No’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swExemptionsReference" type="ReferenceType" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Provide references or hyperlinks to the relevant documents and sections where specific information on the application of exemptions for surface water bodies can be found. Guidance on what should be included in this document is provided in Section 7.7.3.2.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="driversSWExemptionsReference" type="ReferenceType" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Provide references or hyperlinks to the relevant documents and sections where information on the drivers behind exemptions for surface water bodies can be found. Guidance on what should be included in this document is provided in Section 7.7.3.2.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
 
</xs:sequence>
</xs:complexType>

element SWExemptions/swExemption44Impact
diagram SWMET_2022_p34.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SignificantImpactType_Enum
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Select from the enumeration list the impacts that are causing the application of exemptions under Article 4(4). More than one impact may be selected. If Article 4(4) exemptions have not been applied report ‘NOTA - Not applicable’.
The option ‘NOSI - No significant impact’ is not valid.
Quality checks: Element check: The option ‘NOSI - No significant impact’ is not valid.
Cross-schema check: The option ‘NOTA – Not applicable’ should be reported if and only if ‘Article 4(4)…’ has not been reported for:
- any surface water body under SWB/SWEcologicalExemptionType/swEcologicalExemptionType, SWB/QualityElement/qeEcologicalExemptionType or SWB/SWChemicalExemptionType/swChemicalExemptionType; and
- any protected area under SWB/SWAssociatedProtectedArea/protectedAreaExemption
source <xs:element name="swExemption44Impact" type="SignificantImpactType_Enum" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Select from the enumeration list the impacts that are causing the application of exemptions under Article 4(4). More than one impact may be selected. If Article 4(4) exemptions have not been applied report ‘NOTA - Not applicable’.
The option ‘NOSI - No significant impact’ is not valid.
Quality checks: Element check: The option ‘NOSI - No significant impact’ is not valid.
Cross-schema check: The option ‘NOTA – Not applicable’ should be reported if and only if ‘Article 4(4)…’ has not been reported for:
- any surface water body under SWB/SWEcologicalExemptionType/swEcologicalExemptionType, SWB/QualityElement/qeEcologicalExemptionType or SWB/SWChemicalExemptionType/swChemicalExemptionType; and
- any protected area under SWB/SWAssociatedProtectedArea/protectedAreaExemption
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWExemptions/swExemption44Driver
diagram SWMET_2022_p35.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type Driver_Enum
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Select from the enumeration list the drivers that are causing the application of exemptions under Article 4(4). More than one driver may be selected. If Article 4(4) exemptions have not been applied report ‘Exemption not applied’.
Quality checks: Within-schema check: ‘Exemption not applied’ should be reported if and only if swExemption44Impact is ‘NOTA – Not applicable’.
source <xs:element name="swExemption44Driver" type="Driver_Enum" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Select from the enumeration list the drivers that are causing the application of exemptions under Article 4(4). More than one driver may be selected. If Article 4(4) exemptions have not been applied report ‘Exemption not applied’.
Quality checks: Within-schema check: ‘Exemption not applied’ should be reported if and only if swExemption44Impact is ‘NOTA – Not applicable’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWExemptions/swExemption45Impact
diagram SWMET_2022_p36.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SignificantImpactType_Enum
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Select from the enumeration list the impacts that are causing the application of exemptions under Article 4(5). More than one impact may be selected. If Article 4(5) exemptions have not been applied report ‘NOTA - Not applicable’.
The option ‘NOSI - No significant impact’ is not valid.
Quality checks: Element check: The option ‘NOSI - No significant impact’ is not valid.
Cross-schema check: The option ‘NOTA – Not applicable’ should be reported if and only if ‘Article 4(5)…’ has not been reported for:
- any surface water body under SWB/SWEcologicalExemptionType/swEcologicalExemptionType, SWB/QualityElement/qeEcologicalExemptionType or SWB/SWChemicalExemptionType/swChemicalExemptionType; and
- any protected area under SWB/SWAssociatedProtectedArea/protectedAreaExemption
source <xs:element name="swExemption45Impact" type="SignificantImpactType_Enum" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Select from the enumeration list the impacts that are causing the application of exemptions under Article 4(5). More than one impact may be selected. If Article 4(5) exemptions have not been applied report ‘NOTA - Not applicable’.
The option ‘NOSI - No significant impact’ is not valid.
Quality checks: Element check: The option ‘NOSI - No significant impact’ is not valid.
Cross-schema check: The option ‘NOTA – Not applicable’ should be reported if and only if ‘Article 4(5)…’ has not been reported for:
- any surface water body under SWB/SWEcologicalExemptionType/swEcologicalExemptionType, SWB/QualityElement/qeEcologicalExemptionType or SWB/SWChemicalExemptionType/swChemicalExemptionType; and
- any protected area under SWB/SWAssociatedProtectedArea/protectedAreaExemption
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWExemptions/swExemption45Driver
diagram SWMET_2022_p37.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type Driver_Enum
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Select from the enumeration list the drivers that are causing the application of exemptions under Article 4(5). More than one driver may be selected. If Article 4(5) exemptions have not been applied report ‘Exemption not applied’.
Quality checks: Within-schema check: ‘Exemption not applied’ should be reported if and only if swExemption45Impact is ‘NOTA – Not applicable’.
source <xs:element name="swExemption45Driver" type="Driver_Enum" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Select from the enumeration list the drivers that are causing the application of exemptions under Article 4(5). More than one driver may be selected. If Article 4(5) exemptions have not been applied report ‘Exemption not applied’.
Quality checks: Within-schema check: ‘Exemption not applied’ should be reported if and only if swExemption45Impact is ‘NOTA – Not applicable’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWExemptions/swDisproportionateCost
diagram SWMET_2022_p38.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Select from the enumeration list the drivers that are causing the application of exemptions under Article 4(5). More than one driver may be selected. If Article 4(5) exemptions have not been applied report ‘Exemption not applied’.
Quality checks: Within-schema check: ‘Exemption not applied’ should be reported if and only if swExemption45Impact is ‘NOTA – Not applicable’.
source <xs:element name="swDisproportionateCost" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Select from the enumeration list the drivers that are causing the application of exemptions under Article 4(5). More than one driver may be selected. If Article 4(5) exemptions have not been applied report ‘Exemption not applied’.
Quality checks: Within-schema check: ‘Exemption not applied’ should be reported if and only if swExemption45Impact is ‘NOTA – Not applicable’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWExemptions/swDisproportionateCostScale
diagram SWMET_2022_p39.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type GeographicalScale_Enum
properties
isRef 0
minOcc 0
maxOcc unbounded
annotation
documentation
Conditional. Select from the enumeration list the scale(s) at which the calculation of costs was carried out in order to assess disproportionality.
Quality checks: Conditional check: report if and only if swDisproportionateCost is ‘Yes’.
source <xs:element name="swDisproportionateCostScale" type="GeographicalScale_Enum" minOccurs="0" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Conditional. Select from the enumeration list the scale(s) at which the calculation of costs was carried out in order to assess disproportionality.
Quality checks: Conditional check: report if and only if swDisproportionateCost is ‘Yes’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWExemptions/swDisproportionateCostAnalysis
diagram SWMET_2022_p40.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type DisproportionateCostAnalysis_Enum
properties
isRef 0
minOcc 0
maxOcc unbounded
annotation
documentation
Conditional. Select from the enumeration list the analysis tools that were used in assessing disproportionate costs. More than one analysis tool may be selected.
Quality checks: Conditional check: report if and only if swDisproportionateCost is ‘Yes’
source <xs:element name="swDisproportionateCostAnalysis" type="DisproportionateCostAnalysis_Enum" minOccurs="0" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Conditional. Select from the enumeration list the analysis tools that were used in assessing disproportionate costs. More than one analysis tool may be selected.
Quality checks: Conditional check: report if and only if swDisproportionateCost is ‘Yes’
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWExemptions/swDisproportionateCostAlternativeFinancing
diagram SWMET_2022_p41.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type DisproportionateCostAlternativeFinancing_Enum
properties
isRef 0
minOcc 0
maxOcc unbounded
annotation
documentation
Conditional. Select from the enumeration list the alternative financing options that have been considered to overcome the costs being disproportionate. More than one financing option may be selected.
Quality checks: Conditional check: report if and only if swDisproportionateCost is ‘Yes’.
source <xs:element name="swDisproportionateCostAlternativeFinancing" type="DisproportionateCostAlternativeFinancing_Enum" minOccurs="0" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Conditional. Select from the enumeration list the alternative financing options that have been considered to overcome the costs being disproportionate. More than one financing option may be selected.
Quality checks: Conditional check: report if and only if swDisproportionateCost is ‘Yes’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWExemptions/swDisproportionateCostOtherEULegislation
diagram SWMET_2022_p42.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. Indicate whether the costs of basic measures listed in Article 11(3)(a) of the WFD have been explicitly excluded from the assessment of disproportionate costs.
Quality checks: Conditional check: report if and only if swDisproportionateCost is ‘Yes’
source <xs:element name="swDisproportionateCostOtherEULegislation" type="YesNoCode_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. Indicate whether the costs of basic measures listed in Article 11(3)(a) of the WFD have been explicitly excluded from the assessment of disproportionate costs.
Quality checks: Conditional check: report if and only if swDisproportionateCost is ‘Yes’
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWExemptions/swTechnicalInfeasibility
diagram SWMET_2022_p43.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type TechnicalInfeasibility_Enum
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Report how ‘technical infeasibility’ has been interpreted in the context of application of exemptions for surface water bodies. More than one option may be selected.
Quality checks: Within-schema check: the option ‘Technical infeasibility has not been used as a reason for exemption’ is not compatible with any other.
source <xs:element name="swTechnicalInfeasibility" type="TechnicalInfeasibility_Enum" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Report how ‘technical infeasibility’ has been interpreted in the context of application of exemptions for surface water bodies. More than one option may be selected.
Quality checks: Within-schema check: the option ‘Technical infeasibility has not been used as a reason for exemption’ is not compatible with any other.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWExemptions/swNaturalConditions
diagram SWMET_2022_p44.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SWNaturalConditions_Enum
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Select from the enumeration list the elements considered when determining that natural conditions require an exemption under Article 4(4).
Quality checks: Within-schema check: the option ‘Natural condition has not been used as a reason for exemption for surface water bodies’ is not compatible with any other.
source <xs:element name="swNaturalConditions" type="SWNaturalConditions_Enum" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Select from the enumeration list the elements considered when determining that natural conditions require an exemption under Article 4(4).
Quality checks: Within-schema check: the option ‘Natural condition has not been used as a reason for exemption for surface water bodies’ is not compatible with any other.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWExemptions/swExemption46
diagram SWMET_2022_p45.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type Exemption46_Enum
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Select from the enumeration list the reasons that have led to the application of exemptions under Article 4(6). More than one reason may be selected.
Quality checks: Within-schema check: the option ‘Article 4(6) has not been applied’ is not compatible with any other.
Cross-schema check: The option ‘Article 4(6) has not been applied’ should be reported if and only if ‘Article 4(6)…’ has not been reported for:
- any surface water body under SWB/SWEcologicalExemptionType/swEcologicalExemptionType, SWB/QualityElement/qeEcologicalExemptionType or SWB/SWChemicalExemptionType/swChemicalExemptionType; and
- any protected area under SWB/SWAssociatedProtectedArea/protectedAreaExemption
source <xs:element name="swExemption46" type="Exemption46_Enum" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Select from the enumeration list the reasons that have led to the application of exemptions under Article 4(6). More than one reason may be selected.
Quality checks: Within-schema check: the option ‘Article 4(6) has not been applied’ is not compatible with any other.
Cross-schema check: The option ‘Article 4(6) has not been applied’ should be reported if and only if ‘Article 4(6)…’ has not been reported for:
- any surface water body under SWB/SWEcologicalExemptionType/swEcologicalExemptionType, SWB/QualityElement/qeEcologicalExemptionType or SWB/SWChemicalExemptionType/swChemicalExemptionType; and
- any protected area under SWB/SWAssociatedProtectedArea/protectedAreaExemption
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWExemptions/swExemption47
diagram SWMET_2022_p46.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type Exemption47_Enum
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Select from the enumeration list the modifications that have led to the application of exemptions under Article 4(7). More than one modification may be selected.
Quality checks: Within-schema check: the option ‘Article 4(7) has not been applied’ is not compatible with any other.
Cross-schema check: The option ‘Article 4(7) has not been applied’ should be reported if and only if ‘Article 4(7)…’ has not been reported for:
- any surface water body under SWB/SWEcologicalExemptionType/swEcologicalExemptionType, SWB/QualityElement/qeEcologicalExemptionType or SWB/SWChemicalExemptionType/swChemicalExemptionType; and
- any protected area under SWB/SWAssociatedProtectedArea/protectedAreaExemption
source <xs:element name="swExemption47" type="Exemption47_Enum" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Select from the enumeration list the modifications that have led to the application of exemptions under Article 4(7). More than one modification may be selected.
Quality checks: Within-schema check: the option ‘Article 4(7) has not been applied’ is not compatible with any other.
Cross-schema check: The option ‘Article 4(7) has not been applied’ should be reported if and only if ‘Article 4(7)…’ has not been reported for:
- any surface water body under SWB/SWEcologicalExemptionType/swEcologicalExemptionType, SWB/QualityElement/qeEcologicalExemptionType or SWB/SWChemicalExemptionType/swChemicalExemptionType; and
- any protected area under SWB/SWAssociatedProtectedArea/protectedAreaExemption
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWExemptions/swExemptionsTransboundary
diagram SWMET_2022_p47.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoNotApplicable_Union_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether the application of exemptions for surface waters has been co-ordinated in a transboundary context. Report ‘Not applicable’ if the RBD is not international.
Quality checks: Cross-schema check: Report ‘Not applicable’ if and only if RBDSUCA/RBD/internationalRBD is ‘No’.
source <xs:element name="swExemptionsTransboundary" type="YesNoNotApplicable_Union_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether the application of exemptions for surface waters has been co-ordinated in a transboundary context. Report ‘Not applicable’ if the RBD is not international.
Quality checks: Cross-schema check: Report ‘Not applicable’ if and only if RBDSUCA/RBD/internationalRBD is ‘No’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWExemptions/swExemptionsReference
diagram SWMET_2022_p48.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Provide references or hyperlinks to the relevant documents and sections where specific information on the application of exemptions for surface water bodies can be found. Guidance on what should be included in this document is provided in Section 7.7.3.2.
source <xs:element name="swExemptionsReference" type="ReferenceType" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Provide references or hyperlinks to the relevant documents and sections where specific information on the application of exemptions for surface water bodies can be found. Guidance on what should be included in this document is provided in Section 7.7.3.2.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWExemptions/driversSWExemptionsReference
diagram SWMET_2022_p49.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Provide references or hyperlinks to the relevant documents and sections where information on the drivers behind exemptions for surface water bodies can be found. Guidance on what should be included in this document is provided in Section 7.7.3.2.
source <xs:element name="driversSWExemptionsReference" type="ReferenceType" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Provide references or hyperlinks to the relevant documents and sections where information on the drivers behind exemptions for surface water bodies can be found. Guidance on what should be included in this document is provided in Section 7.7.3.2.</xs:documentation>
 
</xs:annotation>
</xs:element>

complexType SWManagementObjectives
diagram SWMET_2022_p50.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
children managementObjectivesNutrients managementObjectivesNutrientsQuantitativeN managementObjectivesNutrientsQuantitativeP managementObjectivesContinuity managementObjectivesContinuityQuantitative managementObjectivesReference waterResourcePlans waterResourcePlansReference
used by
element SWMET/SWManagementObjectives
annotation
documentation
Some Member States have established management objectives to address a specific issue. Reporting on these objectives can provide useful quantitative information about objectives at RBD level.
source <xs:complexType name="SWManagementObjectives">
 
<xs:annotation>
   
<xs:documentation>Some Member States have established management objectives to address a specific issue. Reporting on these objectives can provide useful quantitative information about objectives at RBD level. </xs:documentation>
 
</xs:annotation>
 
<xs:sequence>
   
<xs:element name="managementObjectivesNutrients" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether overall management objectives have been set for nutrient pollution.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="managementObjectivesNutrientsQuantitativeN" type="YesNoCode_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. Indicate whether quantitative objectives have been set in terms of nitrogen load reduction. Quality checks: Conditional check: Report if managementObjectivesNutrients is 'Yes'.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="managementObjectivesNutrientsQuantitativeP" type="YesNoCode_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. Indicate whether quantitative objectives have been set in terms of phosphorus load reduction. Quality checks: Conditional check: Report if managementObjectivesNutrients is 'Yes'.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="managementObjectivesContinuity" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether overall management objectives have been set for river continuity.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="managementObjectivesContinuityQuantitative" type="YesNoCode_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. Indicate whether quantitative objectives have been set in terms of river continuity (e.g. km of rivers connected, number of obstacles to be made passable, etc). Quality checks: Conditional check: Report if managementObjectivesContinuity is 'Yes'.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="managementObjectivesReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Conditional. Provide references to the documents and sections where further information on the management objectives can be found. Guidance on what should be included in this document is provided in Section 7.5.2.2.
Quality checks: Conditional check: Report if and only if managementObjectivesNutrients is ‘Yes’ or managementObjectivesContinuity is ‘Yes’ or both are ‘Yes’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="waterResourcePlans" type="YesNoRBMPCode_Union_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether separate Water Resource Plans have been developed in relation to abstractions and e-flows or whether this topic is included in the RBMP.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="waterResourcePlansReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Conditional. If there are Water Resource Plans, please upload or provide the hyperlinks to the relevant documents.
Quality checks: Conditional check: Report if and only if waterResourcePlans is ‘Yes’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
 
</xs:sequence>
</xs:complexType>

element SWManagementObjectives/managementObjectivesNutrients
diagram SWMET_2022_p51.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether overall management objectives have been set for nutrient pollution.
source <xs:element name="managementObjectivesNutrients" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether overall management objectives have been set for nutrient pollution.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWManagementObjectives/managementObjectivesNutrientsQuantitativeN
diagram SWMET_2022_p52.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. Indicate whether quantitative objectives have been set in terms of nitrogen load reduction. Quality checks: Conditional check: Report if managementObjectivesNutrients is 'Yes'.
source <xs:element name="managementObjectivesNutrientsQuantitativeN" type="YesNoCode_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. Indicate whether quantitative objectives have been set in terms of nitrogen load reduction. Quality checks: Conditional check: Report if managementObjectivesNutrients is 'Yes'.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWManagementObjectives/managementObjectivesNutrientsQuantitativeP
diagram SWMET_2022_p53.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. Indicate whether quantitative objectives have been set in terms of phosphorus load reduction. Quality checks: Conditional check: Report if managementObjectivesNutrients is 'Yes'.
source <xs:element name="managementObjectivesNutrientsQuantitativeP" type="YesNoCode_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. Indicate whether quantitative objectives have been set in terms of phosphorus load reduction. Quality checks: Conditional check: Report if managementObjectivesNutrients is 'Yes'.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWManagementObjectives/managementObjectivesContinuity
diagram SWMET_2022_p54.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether overall management objectives have been set for river continuity.
source <xs:element name="managementObjectivesContinuity" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether overall management objectives have been set for river continuity.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWManagementObjectives/managementObjectivesContinuityQuantitative
diagram SWMET_2022_p55.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. Indicate whether quantitative objectives have been set in terms of river continuity (e.g. km of rivers connected, number of obstacles to be made passable, etc). Quality checks: Conditional check: Report if managementObjectivesContinuity is 'Yes'.
source <xs:element name="managementObjectivesContinuityQuantitative" type="YesNoCode_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. Indicate whether quantitative objectives have been set in terms of river continuity (e.g. km of rivers connected, number of obstacles to be made passable, etc). Quality checks: Conditional check: Report if managementObjectivesContinuity is 'Yes'.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWManagementObjectives/managementObjectivesReference
diagram SWMET_2022_p56.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 0
maxOcc unbounded
annotation
documentation
Conditional. Provide references to the documents and sections where further information on the management objectives can be found. Guidance on what should be included in this document is provided in Section 7.5.2.2.
Quality checks: Conditional check: Report if and only if managementObjectivesNutrients is ‘Yes’ or managementObjectivesContinuity is ‘Yes’ or both are ‘Yes’.
source <xs:element name="managementObjectivesReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Conditional. Provide references to the documents and sections where further information on the management objectives can be found. Guidance on what should be included in this document is provided in Section 7.5.2.2.
Quality checks: Conditional check: Report if and only if managementObjectivesNutrients is ‘Yes’ or managementObjectivesContinuity is ‘Yes’ or both are ‘Yes’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWManagementObjectives/waterResourcePlans
diagram SWMET_2022_p57.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoRBMPCode_Union_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether separate Water Resource Plans have been developed in relation to abstractions and e-flows or whether this topic is included in the RBMP.
source <xs:element name="waterResourcePlans" type="YesNoRBMPCode_Union_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether separate Water Resource Plans have been developed in relation to abstractions and e-flows or whether this topic is included in the RBMP.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWManagementObjectives/waterResourcePlansReference
diagram SWMET_2022_p58.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 0
maxOcc unbounded
annotation
documentation
Conditional. If there are Water Resource Plans, please upload or provide the hyperlinks to the relevant documents.
Quality checks: Conditional check: Report if and only if waterResourcePlans is ‘Yes’.
source <xs:element name="waterResourcePlansReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Conditional. If there are Water Resource Plans, please upload or provide the hyperlinks to the relevant documents.
Quality checks: Conditional check: Report if and only if waterResourcePlans is ‘Yes’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

complexType SWMET
diagram SWMET_2022_p59.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
children countryCode 1..1 euRBDCode SWType SWMethodologies BQEMethod SWSupportingQE SWPhysicoChemicalQE SWRBSP SWTargetedQ SWPrioritySubstance SWChemicalStatusClassificationRBD SWManagementObjectives SWPressures SWExemptions
used by
element SWMET
source <xs:complexType name="SWMET">
 
<xs:sequence>
   
<xs:element name="countryCode" type="CountryCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Two-letter ISO country code</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="1..1" type="dcMetadata"/>
   
<xs:element name="euRBDCode" type="FeatureUniqueEUCodeType">
     
<xs:annotation>
       
<xs:documentation>Required. Unique EU code of the River Basin District. Prefix the RBD's national, unique code with the Member State's 2-alpha character ISO country code. Quality checks: Element check: First 2 characters must be the Member State's 2-alpha character ISO country code. Cross-schema check: The reported euRBDCode must be consistent with the codes reported in RBDSUCA/RBD/euRBDCode. </xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="SWType" type="SWType" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>For each type of surface water body, report the embeded information.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="SWMethodologies" type="SWMethodologies">
     
<xs:annotation>
       
<xs:documentation>Table 7.2.3.2 Report the following information on methodologies</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="BQEMethod" type="BQEMethod" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Table 7.3.3.2 Report the following information on assessment methods for BQEs.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="SWSupportingQE" type="SWSupportingQE" maxOccurs="9">
     
<xs:annotation>
       
<xs:documentation>Report the following information on assessment methods for supporting QEs.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="SWPhysicoChemicalQE" type="SWPhysicoChemicalQE" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Table 7.3.3.2</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="SWRBSP" type="SWRBSP" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Table 7.3.3.2</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="SWTargetedQ" type="SWTargetedQ">
     
<xs:annotation>
       
<xs:documentation>Table 7.2.3.2</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="SWPrioritySubstance" type="SWPrioritySubstance" maxOccurs="unbounded"/>
   
<xs:element name="SWChemicalStatusClassificationRBD" type="SWChemicalStatusClassificationRBD">
     
<xs:annotation>
       
<xs:documentation>Table 7.4.3.2</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="SWManagementObjectives" type="SWManagementObjectives">
     
<xs:annotation>
       
<xs:documentation>Table 7.5.2.2 SWManagementObjectives</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="SWPressures" type="SWPressures">
     
<xs:annotation>
       
<xs:documentation>Table 7.6.3.2</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="SWExemptions" type="SWExemptions">
     
<xs:annotation>
       
<xs:documentation>Table 7.7.3.2</xs:documentation>
     
</xs:annotation>
   
</xs:element>
 
</xs:sequence>
</xs:complexType>

element SWMET/countryCode
diagram SWMET_2022_p60.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type CountryCode_Enum
properties
isRef 0
annotation
documentation
Required. Two-letter ISO country code
source <xs:element name="countryCode" type="CountryCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Two-letter ISO country code</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMET/1..1
diagram SWMET_2022_p61.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type dcMetadata
properties
isRef 0
source <xs:element name="1..1" type="dcMetadata"/>

element SWMET/euRBDCode
diagram SWMET_2022_p62.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type FeatureUniqueEUCodeType
properties
isRef 0
annotation
documentation
Required. Unique EU code of the River Basin District. Prefix the RBD's national, unique code with the Member State's 2-alpha character ISO country code. Quality checks: Element check: First 2 characters must be the Member State's 2-alpha character ISO country code. Cross-schema check: The reported euRBDCode must be consistent with the codes reported in RBDSUCA/RBD/euRBDCode.
source <xs:element name="euRBDCode" type="FeatureUniqueEUCodeType">
 
<xs:annotation>
   
<xs:documentation>Required. Unique EU code of the River Basin District. Prefix the RBD's national, unique code with the Member State's 2-alpha character ISO country code. Quality checks: Element check: First 2 characters must be the Member State's 2-alpha character ISO country code. Cross-schema check: The reported euRBDCode must be consistent with the codes reported in RBDSUCA/RBD/euRBDCode. </xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMET/SWType
diagram SWMET_2022_p63.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SWType
properties
isRef 0
minOcc 1
maxOcc unbounded
content complex
children swTypeCode swTypeDescription swIntercalibrationType swTypeCategory swTypeSpecificReferenceConditionsForBQEs swTypeSpecificHyMoConditions swTypeSpecificPhysChemConditions
annotation
documentation
For each type of surface water body, report the embeded information.
source <xs:element name="SWType" type="SWType" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>For each type of surface water body, report the embeded information.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMET/SWMethodologies
diagram SWMET_2022_p64.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SWMethodologies
properties
isRef 0
content complex
children typologyMethodologyReference smallWBsMethodologyReference minimumCatchmentAreaRivers minimumSurfaceAreaLakes otherMinimumCriteria iRBDTypologyCoOrdinationReference hmwbMethodologyReference
annotation
documentation
Table 7.2.3.2 Report the following information on methodologies
source <xs:element name="SWMethodologies" type="SWMethodologies">
 
<xs:annotation>
   
<xs:documentation>Table 7.2.3.2 Report the following information on methodologies</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMET/BQEMethod
diagram SWMET_2022_p65.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type BQEMethod
properties
isRef 0
minOcc 1
maxOcc unbounded
content complex
children bqeMethodName bqeCode bqeCategoryRW bqeCategoryLW bqeCategoryTW bqeCategoryCW bqePercentageOfTypes bqeSensitivityImpactNutrients bqeSensitivityImpactOrganic bqeSensitivityImpactChemical bqeSensitivityImpactSaline bqeSensitivityImpactAcidification bqeSensitivityImpactTemperature bqeSensitivityImpactHydrological bqeSensitivityImpactMorphological bqeSensitivityImpactOther
annotation
documentation
Table 7.3.3.2 Report the following information on assessment methods for BQEs.
source <xs:element name="BQEMethod" type="BQEMethod" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Table 7.3.3.2 Report the following information on assessment methods for BQEs.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMET/SWSupportingQE
diagram SWMET_2022_p66.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SWSupportingQE
properties
isRef 0
minOcc 1
maxOcc 9
content complex
children supportingQECode supportingQESensitivityBQE
annotation
documentation
Report the following information on assessment methods for supporting QEs.
source <xs:element name="SWSupportingQE" type="SWSupportingQE" maxOccurs="9">
 
<xs:annotation>
   
<xs:documentation>Report the following information on assessment methods for supporting QEs.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMET/SWPhysicoChemicalQE
diagram SWMET_2022_p67.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SWPhysicoChemicalQE
properties
isRef 0
minOcc 1
maxOcc unbounded
content complex
children physChemQECode physChemQEOther physChemCategoryRW physChemCategoryLW physChemCategoryTW physChemCategoryCW physChemTypeCode physChemValue physChemUnit physChemUnitOther physChemStandardType physChemStandardOther physChemGMBoundary
annotation
documentation
Table 7.3.3.2
source <xs:element name="SWPhysicoChemicalQE" type="SWPhysicoChemicalQE" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Table 7.3.3.2</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMET/SWRBSP
diagram SWMET_2022_p68.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SWRBSP
properties
isRef 0
minOcc 1
maxOcc unbounded
content complex
children rbspCode rbspOther rbspMatrix rbspCategoryRW rbspCategoryLW rbspCategoryTW rbspCategoryCW rbspStandardType rbspValue rbspUnit rbspScale rbspTechGuidance rbspAnalyticalMethod rbspAnalyticalMethodBAT
annotation
documentation
Table 7.3.3.2
source <xs:element name="SWRBSP" type="SWRBSP" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Table 7.3.3.2</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMET/SWTargetedQ
diagram SWMET_2022_p69.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SWTargetedQ
properties
isRef 0
content complex
children oneOutAllOut groupingExtrapolation gepDefined gepLevel gepApproach gepBiology mitigationMeasures bqeForMEPGEP gesGepComparison ecologicalStatusMethodReference gepMethodReference driversFailureEcologicalStatusPotentialReference
annotation
documentation
Table 7.2.3.2
source <xs:element name="SWTargetedQ" type="SWTargetedQ">
 
<xs:annotation>
   
<xs:documentation>Table 7.2.3.2</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMET/SWPrioritySubstance
diagram SWMET_2022_p70.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SWPrioritySubstance
properties
isRef 0
minOcc 1
maxOcc unbounded
content complex
children psCode psStatusAssessment psMatrix psStandardsUsed psCategoryRW psCategoryLW psCategoryTW psCategoryCW psCategoryTeW psStandardType psValue psUnit psScale psAnalyticalMethod psAnalyticalMethodBAT
source <xs:element name="SWPrioritySubstance" type="SWPrioritySubstance" maxOccurs="unbounded"/>

element SWMET/SWChemicalStatusClassificationRBD
diagram SWMET_2022_p71.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SWChemicalStatusClassificationRBD
properties
isRef 0
content complex
children approachSWBNotMonitoredChemicalReference limitOfQuantification backgroundConcentrations backgroundConcentrationsReference bioavailability bioavailabilityReference longTermTrendAnalysis longTermTrendAnalysisReference mixingZoneMethodology alternativeMixingZoneMethodologyReference mixingZoneMeasures mixingZoneMeasuresReductionReference chemicalStatusReference
annotation
documentation
Table 7.4.3.2
source <xs:element name="SWChemicalStatusClassificationRBD" type="SWChemicalStatusClassificationRBD">
 
<xs:annotation>
   
<xs:documentation>Table 7.4.3.2</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMET/SWManagementObjectives
diagram SWMET_2022_p72.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SWManagementObjectives
properties
isRef 0
content complex
children managementObjectivesNutrients managementObjectivesNutrientsQuantitativeN managementObjectivesNutrientsQuantitativeP managementObjectivesContinuity managementObjectivesContinuityQuantitative managementObjectivesReference waterResourcePlans waterResourcePlansReference
annotation
documentation
Table 7.5.2.2 SWManagementObjectives
source <xs:element name="SWManagementObjectives" type="SWManagementObjectives">
 
<xs:annotation>
   
<xs:documentation>Table 7.5.2.2 SWManagementObjectives</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMET/SWPressures
diagram SWMET_2022_p73.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SWPressures
properties
isRef 0
content complex
children swPressuresNotAssessed swSignificantPressurePointSourceTools swSignificantPressureDiffuseSourceTools swSignificantPressureWaterAbstractionTools swSignificantPressureWaterFlowTools swSignificantPressureOtherSourceTools swSignificanceDefinition swSignificanceLinkFailure swPressuresReference
annotation
documentation
Table 7.6.3.2
source <xs:element name="SWPressures" type="SWPressures">
 
<xs:annotation>
   
<xs:documentation>Table 7.6.3.2</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMET/SWExemptions
diagram SWMET_2022_p74.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SWExemptions
properties
isRef 0
content complex
children swExemption44Impact swExemption44Driver swExemption45Impact swExemption45Driver swDisproportionateCost swDisproportionateCostScale swDisproportionateCostAnalysis swDisproportionateCostAlternativeFinancing swDisproportionateCostOtherEULegislation swTechnicalInfeasibility swNaturalConditions swExemption46 swExemption47 swExemptionsTransboundary swExemptionsReference driversSWExemptionsReference
annotation
documentation
Table 7.7.3.2
source <xs:element name="SWExemptions" type="SWExemptions">
 
<xs:annotation>
   
<xs:documentation>Table 7.7.3.2</xs:documentation>
 
</xs:annotation>
</xs:element>

complexType SWMethodologies
diagram SWMET_2022_p75.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
children typologyMethodologyReference smallWBsMethodologyReference minimumCatchmentAreaRivers minimumSurfaceAreaLakes otherMinimumCriteria iRBDTypologyCoOrdinationReference hmwbMethodologyReference
used by
element SWMET/SWMethodologies
annotation
documentation
Used to report information on methodologies
source <xs:complexType name="SWMethodologies">
 
<xs:annotation>
   
<xs:documentation>Used to report information on methodologies</xs:documentation>
 
</xs:annotation>
 
<xs:sequence>
   
<xs:element name="typologyMethodologyReference" type="ReferenceType" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Provide references or hyperlinks to the documents and sections where relevant information relating to the typology methodology can be found. Guidance on what should be included in those documents is provided in Section 7.2.3.2.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="smallWBsMethodologyReference" type="ReferenceType" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Provide references or hyperlinks to the documents and sections where relevant information relating to the methodology for small water bodies can be found. Guidance on what should be included in those documents is provided in Section 7.2.3.2.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="minimumCatchmentAreaRivers" type="NumberDecimalType">
     
<xs:annotation>
       
<xs:documentation>Required. If defined, state the minimum catchment area, in km², for a river to be delineated as a water body in the RBMP. If not defined, report -8888.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="minimumSurfaceAreaLakes" type="NumberDecimalType">
     
<xs:annotation>
       
<xs:documentation>Required. If defined, state the minimum surface area, in km², for a lake to be delineated as a water body in the RBMP. If not defined, report -8888.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="otherMinimumCriteria" type="String1000Type" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Optional. If the minimum criteria used for the delineation of river water bodies is not based (or not only based) on catchment area, or for lake water bodies is not based (or not only based) on surface area, briefly describe the criteria used.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="iRBDTypologyCoOrdinationReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Conditional. Provide references or hyperlinks to the documents and sections where relevant information relating to the co-ordination of typology methodology in international RBDs can be found. Guidance on what should be included in those documents is provided in Section 7.2.3.2.
Quality checks: Cross-schema check: Report if and only if RBDSUCA/RBD/internationalRBD is ‘Yes’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="hmwbMethodologyReference" type="ReferenceType" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Provide references or hyperlinks to the documents and sections where any relevant information relating to the methodology for the designation of AWB and HMWB can be found. Guidance on what should be included in those documents is provided in Section 7.2.3.2.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
 
</xs:sequence>
</xs:complexType>

element SWMethodologies/typologyMethodologyReference
diagram SWMET_2022_p76.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Provide references or hyperlinks to the documents and sections where relevant information relating to the typology methodology can be found. Guidance on what should be included in those documents is provided in Section 7.2.3.2.
source <xs:element name="typologyMethodologyReference" type="ReferenceType" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Provide references or hyperlinks to the documents and sections where relevant information relating to the typology methodology can be found. Guidance on what should be included in those documents is provided in Section 7.2.3.2.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMethodologies/smallWBsMethodologyReference
diagram SWMET_2022_p77.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Provide references or hyperlinks to the documents and sections where relevant information relating to the methodology for small water bodies can be found. Guidance on what should be included in those documents is provided in Section 7.2.3.2.
source <xs:element name="smallWBsMethodologyReference" type="ReferenceType" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Provide references or hyperlinks to the documents and sections where relevant information relating to the methodology for small water bodies can be found. Guidance on what should be included in those documents is provided in Section 7.2.3.2.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMethodologies/minimumCatchmentAreaRivers
diagram SWMET_2022_p78.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type NumberDecimalType
properties
isRef 0
annotation
documentation
Required. If defined, state the minimum catchment area, in km², for a river to be delineated as a water body in the RBMP. If not defined, report -8888.
source <xs:element name="minimumCatchmentAreaRivers" type="NumberDecimalType">
 
<xs:annotation>
   
<xs:documentation>Required. If defined, state the minimum catchment area, in km², for a river to be delineated as a water body in the RBMP. If not defined, report -8888.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMethodologies/minimumSurfaceAreaLakes
diagram SWMET_2022_p79.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type NumberDecimalType
properties
isRef 0
annotation
documentation
Required. If defined, state the minimum surface area, in km², for a lake to be delineated as a water body in the RBMP. If not defined, report -8888.
source <xs:element name="minimumSurfaceAreaLakes" type="NumberDecimalType">
 
<xs:annotation>
   
<xs:documentation>Required. If defined, state the minimum surface area, in km², for a lake to be delineated as a water body in the RBMP. If not defined, report -8888.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMethodologies/otherMinimumCriteria
diagram SWMET_2022_p80.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type String1000Type
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Optional. If the minimum criteria used for the delineation of river water bodies is not based (or not only based) on catchment area, or for lake water bodies is not based (or not only based) on surface area, briefly describe the criteria used.
source <xs:element name="otherMinimumCriteria" type="String1000Type" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Optional. If the minimum criteria used for the delineation of river water bodies is not based (or not only based) on catchment area, or for lake water bodies is not based (or not only based) on surface area, briefly describe the criteria used.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMethodologies/iRBDTypologyCoOrdinationReference
diagram SWMET_2022_p81.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 0
maxOcc unbounded
annotation
documentation
Conditional. Provide references or hyperlinks to the documents and sections where relevant information relating to the co-ordination of typology methodology in international RBDs can be found. Guidance on what should be included in those documents is provided in Section 7.2.3.2.
Quality checks: Cross-schema check: Report if and only if RBDSUCA/RBD/internationalRBD is ‘Yes’.
source <xs:element name="iRBDTypologyCoOrdinationReference" type="ReferenceType" minOccurs="0" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Conditional. Provide references or hyperlinks to the documents and sections where relevant information relating to the co-ordination of typology methodology in international RBDs can be found. Guidance on what should be included in those documents is provided in Section 7.2.3.2.
Quality checks: Cross-schema check: Report if and only if RBDSUCA/RBD/internationalRBD is ‘Yes’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWMethodologies/hmwbMethodologyReference
diagram SWMET_2022_p82.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Provide references or hyperlinks to the documents and sections where any relevant information relating to the methodology for the designation of AWB and HMWB can be found. Guidance on what should be included in those documents is provided in Section 7.2.3.2.
source <xs:element name="hmwbMethodologyReference" type="ReferenceType" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Provide references or hyperlinks to the documents and sections where any relevant information relating to the methodology for the designation of AWB and HMWB can be found. Guidance on what should be included in those documents is provided in Section 7.2.3.2.</xs:documentation>
 
</xs:annotation>
</xs:element>

complexType SWPhysicoChemicalQE
diagram SWMET_2022_p83.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
children physChemQECode physChemQEOther physChemCategoryRW physChemCategoryLW physChemCategoryTW physChemCategoryCW physChemTypeCode physChemValue physChemUnit physChemUnitOther physChemStandardType physChemStandardOther physChemGMBoundary
used by
element SWMET/SWPhysicoChemicalQE
annotation
documentation
Report information on standards for general physico-chemical QEs, including nutrients. Report the whole class once for each standard that has been used. If one or more of the QEs for which there is a standard are not included in the enumeration list PhysChemQE_Enum, you should use the ‘Other determinand…’ options in the enumeration list and report the whole class also once for each of the corresponding standards.
source <xs:complexType name="SWPhysicoChemicalQE">
 
<xs:annotation>
   
<xs:documentation>Report information on standards for general physico-chemical QEs, including nutrients. Report the whole class once for each standard that has been used. If one or more of the QEs for which there is a standard are not included in the enumeration list PhysChemQE_Enum, you should use the ‘Other determinand…’ options in the enumeration list and report the whole class also once for each of the corresponding standards. </xs:documentation>
 
</xs:annotation>
 
<xs:sequence>
   
<xs:element name="physChemQECode" type="PhysChemQE_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Select from the enumeration list the physico-chemical QE, at the level 4 of aggregation, for which the standard being reported has been used. If the QE for which the standard was used is not included the enumeration list, please select the most relevant ‘Other determinand…’ QE and describe in more detail in physChemQEOther. Please select one of the ‘Other determinand…’ options only if the QE in question is not included in the enumeration list.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="physChemQEOther" type="String100Type" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. Report details of the physico-chemical QE for which this standard was used, if it is not included in the enumeration list physChemQE_Enum.
Quality checks: Conditional check: Report if and only if physChemQECode is one of the following: ‘QE3-1-1-2 – Other determinand for transparency’, ‘QE3-1-2-2 – Other determinand for thermal conditions’, ‘QE3-1-3-3 – Other determinand for oxygenation conditions’, ‘QE3-1-4-2 – Other determinand for salinity’, ‘QE3-1-5-3 – Other determinand for acidification status’ or ‘QE3-1-6-4 – Other determinand for nutrient conditions’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="physChemCategoryRW" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Does this physico-chemical standard apply to rivers? </xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="physChemCategoryLW" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Does this physico-chemical standard apply to lakes? </xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="physChemCategoryTW" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Does this physico-chemical standard apply to transitional waters? </xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="physChemCategoryCW" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Does this physico-chemical standard apply to coastal waters? </xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="physChemTypeCode" type="String100Type" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Report the Member State code for the characterisation type of surface water bodies, as reported in SWMET/SWType/swTypeCode.
More than one type can be reported for the same standard. If the standard applies to all national types, please enter ‘All’ (in English).
If the types used in the derivation of physico-chemical standards are different from those used in the assessment of BQEs, please make sure that you report here the specific national physico-chemical types. If so, please ensure that the specific methodology document relating to the derivation of standards (and in particular how it is ensured that all biological types are covered by the standards) is uploaded to WISE or made available on a national website.
Quality checks: Within-schema check: The reported physChemTypeCode must be consistent with the codes reported in SWMET/SWType/swTypeCode, or the entry ‘All’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="physChemValue" type="String20Type">
     
<xs:annotation>
       
<xs:documentation>Required. Report the value or range of the physico-chemical standard representing the good-moderate boundary only.
Quality checks: Element check: Reporting must be either one single value or a range, written as ‘xxx – yyy’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="physChemUnit" type="UnitOfMeasure_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Report the unit in which the physico-chemical standard is expressed. Please report ‘{other}’ only if the unit used is not included in the enumeration list.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="physChemUnitOther" type="String10Type" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. Report if the unit in which the physico-chemical standard is expressed is reported as ‘{other}’ in physChemUnit.
Quality checks: Conditional check: Report if and only if physChemUnit is ‘{other}’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="physChemStandardType" type="PhysChemStandardType_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Select the type of physico-chemical standard applied.
‘AA-EQS’ = Annual Average EQS
‘MAC-EQS’ = Maximum Allowable Concentration EQS
’95th percentile’ = 95th percentile
‘Other’ = Other
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="physChemStandardOther" type="String10Type" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. Report if the type of physico-chemical standard applied is reported as ‘Other’ in physChemStandardType.
Quality checks: Conditional check: Report if and only if physChemStandardType is ‘Other’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="physChemGMBoundary" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether the physico-chemical standard is consistent with the good-moderate status boundary of the relevant sensitive BQEs.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
 
</xs:sequence>
</xs:complexType>

element SWPhysicoChemicalQE/physChemQECode
diagram SWMET_2022_p84.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type PhysChemQE_Enum
properties
isRef 0
annotation
documentation
Required. Select from the enumeration list the physico-chemical QE, at the level 4 of aggregation, for which the standard being reported has been used. If the QE for which the standard was used is not included the enumeration list, please select the most relevant ‘Other determinand…’ QE and describe in more detail in physChemQEOther. Please select one of the ‘Other determinand…’ options only if the QE in question is not included in the enumeration list.
source <xs:element name="physChemQECode" type="PhysChemQE_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Select from the enumeration list the physico-chemical QE, at the level 4 of aggregation, for which the standard being reported has been used. If the QE for which the standard was used is not included the enumeration list, please select the most relevant ‘Other determinand…’ QE and describe in more detail in physChemQEOther. Please select one of the ‘Other determinand…’ options only if the QE in question is not included in the enumeration list.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPhysicoChemicalQE/physChemQEOther
diagram SWMET_2022_p85.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type String100Type
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. Report details of the physico-chemical QE for which this standard was used, if it is not included in the enumeration list physChemQE_Enum.
Quality checks: Conditional check: Report if and only if physChemQECode is one of the following: ‘QE3-1-1-2 – Other determinand for transparency’, ‘QE3-1-2-2 – Other determinand for thermal conditions’, ‘QE3-1-3-3 – Other determinand for oxygenation conditions’, ‘QE3-1-4-2 – Other determinand for salinity’, ‘QE3-1-5-3 – Other determinand for acidification status’ or ‘QE3-1-6-4 – Other determinand for nutrient conditions’.
source <xs:element name="physChemQEOther" type="String100Type" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. Report details of the physico-chemical QE for which this standard was used, if it is not included in the enumeration list physChemQE_Enum.
Quality checks: Conditional check: Report if and only if physChemQECode is one of the following: ‘QE3-1-1-2 – Other determinand for transparency’, ‘QE3-1-2-2 – Other determinand for thermal conditions’, ‘QE3-1-3-3 – Other determinand for oxygenation conditions’, ‘QE3-1-4-2 – Other determinand for salinity’, ‘QE3-1-5-3 – Other determinand for acidification status’ or ‘QE3-1-6-4 – Other determinand for nutrient conditions’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPhysicoChemicalQE/physChemCategoryRW
diagram SWMET_2022_p86.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Does this physico-chemical standard apply to rivers?
source <xs:element name="physChemCategoryRW" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Does this physico-chemical standard apply to rivers? </xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPhysicoChemicalQE/physChemCategoryLW
diagram SWMET_2022_p87.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Does this physico-chemical standard apply to lakes?
source <xs:element name="physChemCategoryLW" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Does this physico-chemical standard apply to lakes? </xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPhysicoChemicalQE/physChemCategoryTW
diagram SWMET_2022_p88.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Does this physico-chemical standard apply to transitional waters?
source <xs:element name="physChemCategoryTW" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Does this physico-chemical standard apply to transitional waters? </xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPhysicoChemicalQE/physChemCategoryCW
diagram SWMET_2022_p89.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Does this physico-chemical standard apply to coastal waters?
source <xs:element name="physChemCategoryCW" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Does this physico-chemical standard apply to coastal waters? </xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPhysicoChemicalQE/physChemTypeCode
diagram SWMET_2022_p90.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type String100Type
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Report the Member State code for the characterisation type of surface water bodies, as reported in SWMET/SWType/swTypeCode.
More than one type can be reported for the same standard. If the standard applies to all national types, please enter ‘All’ (in English).
If the types used in the derivation of physico-chemical standards are different from those used in the assessment of BQEs, please make sure that you report here the specific national physico-chemical types. If so, please ensure that the specific methodology document relating to the derivation of standards (and in particular how it is ensured that all biological types are covered by the standards) is uploaded to WISE or made available on a national website.
Quality checks: Within-schema check: The reported physChemTypeCode must be consistent with the codes reported in SWMET/SWType/swTypeCode, or the entry ‘All’.
source <xs:element name="physChemTypeCode" type="String100Type" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Report the Member State code for the characterisation type of surface water bodies, as reported in SWMET/SWType/swTypeCode.
More than one type can be reported for the same standard. If the standard applies to all national types, please enter ‘All’ (in English).
If the types used in the derivation of physico-chemical standards are different from those used in the assessment of BQEs, please make sure that you report here the specific national physico-chemical types. If so, please ensure that the specific methodology document relating to the derivation of standards (and in particular how it is ensured that all biological types are covered by the standards) is uploaded to WISE or made available on a national website.
Quality checks: Within-schema check: The reported physChemTypeCode must be consistent with the codes reported in SWMET/SWType/swTypeCode, or the entry ‘All’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPhysicoChemicalQE/physChemValue
diagram SWMET_2022_p91.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type String20Type
properties
isRef 0
annotation
documentation
Required. Report the value or range of the physico-chemical standard representing the good-moderate boundary only.
Quality checks: Element check: Reporting must be either one single value or a range, written as ‘xxx – yyy’.
source <xs:element name="physChemValue" type="String20Type">
 
<xs:annotation>
   
<xs:documentation>Required. Report the value or range of the physico-chemical standard representing the good-moderate boundary only.
Quality checks: Element check: Reporting must be either one single value or a range, written as ‘xxx – yyy’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPhysicoChemicalQE/physChemUnit
diagram SWMET_2022_p92.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type UnitOfMeasure_Enum
properties
isRef 0
annotation
documentation
Required. Report the unit in which the physico-chemical standard is expressed. Please report ‘{other}’ only if the unit used is not included in the enumeration list.
source <xs:element name="physChemUnit" type="UnitOfMeasure_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Report the unit in which the physico-chemical standard is expressed. Please report ‘{other}’ only if the unit used is not included in the enumeration list.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPhysicoChemicalQE/physChemUnitOther
diagram SWMET_2022_p93.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type String10Type
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. Report if the unit in which the physico-chemical standard is expressed is reported as ‘{other}’ in physChemUnit.
Quality checks: Conditional check: Report if and only if physChemUnit is ‘{other}’.
source <xs:element name="physChemUnitOther" type="String10Type" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. Report if the unit in which the physico-chemical standard is expressed is reported as ‘{other}’ in physChemUnit.
Quality checks: Conditional check: Report if and only if physChemUnit is ‘{other}’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPhysicoChemicalQE/physChemStandardType
diagram SWMET_2022_p94.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type PhysChemStandardType_Enum
properties
isRef 0
annotation
documentation
Required. Select the type of physico-chemical standard applied.
‘AA-EQS’ = Annual Average EQS
‘MAC-EQS’ = Maximum Allowable Concentration EQS
’95th percentile’ = 95th percentile
‘Other’ = Other
source <xs:element name="physChemStandardType" type="PhysChemStandardType_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Select the type of physico-chemical standard applied.
‘AA-EQS’ = Annual Average EQS
‘MAC-EQS’ = Maximum Allowable Concentration EQS
’95th percentile’ = 95th percentile
‘Other’ = Other
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPhysicoChemicalQE/physChemStandardOther
diagram SWMET_2022_p95.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type String10Type
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. Report if the type of physico-chemical standard applied is reported as ‘Other’ in physChemStandardType.
Quality checks: Conditional check: Report if and only if physChemStandardType is ‘Other’.
source <xs:element name="physChemStandardOther" type="String10Type" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. Report if the type of physico-chemical standard applied is reported as ‘Other’ in physChemStandardType.
Quality checks: Conditional check: Report if and only if physChemStandardType is ‘Other’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPhysicoChemicalQE/physChemGMBoundary
diagram SWMET_2022_p96.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether the physico-chemical standard is consistent with the good-moderate status boundary of the relevant sensitive BQEs.
source <xs:element name="physChemGMBoundary" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether the physico-chemical standard is consistent with the good-moderate status boundary of the relevant sensitive BQEs.</xs:documentation>
 
</xs:annotation>
</xs:element>

complexType SWPressures
diagram SWMET_2022_p97.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
children swPressuresNotAssessed swSignificantPressurePointSourceTools swSignificantPressureDiffuseSourceTools swSignificantPressureWaterAbstractionTools swSignificantPressureWaterFlowTools swSignificantPressureOtherSourceTools swSignificanceDefinition swSignificanceLinkFailure swPressuresReference
used by
element SWMET/SWPressures
source <xs:complexType name="SWPressures">
 
<xs:sequence>
   
<xs:element name="swPressuresNotAssessed" type="SignificantPressureType_Enum" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Select from the enumeration list the pressure types that have not been assessed (i.e. pressure types that have not been considered because they are not relevant for surface waters, they were not deemed to be important in the RBD, no information was available, or any other reason). If all pressures have been assessed report ‘Not applicable’. The option ‘No significant pressure’ is not valid.
Quality checks: Element check: the option ‘No significant pressure’ is not valid.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swSignificantPressurePointSourceTools" type="SignificantPressureTools_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Report the tools that have been used to define significant pressures from point sources. ‘Numerical tools’ includes modelling.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swSignificantPressureDiffuseSourceTools" type="SignificantPressureTools_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Report the tools that have been used to define significant pressures from diffuse sources. ‘Numerical tools’ includes modelling.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swSignificantPressureWaterAbstractionTools" type="SignificantPressureTools_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Report the tools that have been used to define significant pressures from water abstractions. ‘Numerical tools’ includes modelling.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swSignificantPressureWaterFlowTools" type="SignificantPressureTools_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Report the tools that have been used to define significant pressures from water flow regulation and morphological alterations. ‘Numerical tools’ includes modelling.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swSignificantPressureOtherSourceTools" type="SignificantPressureTools_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Report the tools that have been used to define significant pressures from other sources. ‘Numerical tools’ includes modelling.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swSignificanceDefinition" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether significance has been defined in terms of thresholds.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swSignificanceLinkFailure" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether the definition of significance is linked to the potential failure of objectives.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swPressuresReference" type="ReferenceType" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Provide references or hyperlinks to the relevant document and sections where other information relating to pressure types can be found. Guidance on what should be included in this document is provided in Section 7.6.3.2.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
 
</xs:sequence>
</xs:complexType>

element SWPressures/swPressuresNotAssessed
diagram SWMET_2022_p98.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SignificantPressureType_Enum
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Select from the enumeration list the pressure types that have not been assessed (i.e. pressure types that have not been considered because they are not relevant for surface waters, they were not deemed to be important in the RBD, no information was available, or any other reason). If all pressures have been assessed report ‘Not applicable’. The option ‘No significant pressure’ is not valid.
Quality checks: Element check: the option ‘No significant pressure’ is not valid.
source <xs:element name="swPressuresNotAssessed" type="SignificantPressureType_Enum" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Select from the enumeration list the pressure types that have not been assessed (i.e. pressure types that have not been considered because they are not relevant for surface waters, they were not deemed to be important in the RBD, no information was available, or any other reason). If all pressures have been assessed report ‘Not applicable’. The option ‘No significant pressure’ is not valid.
Quality checks: Element check: the option ‘No significant pressure’ is not valid.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPressures/swSignificantPressurePointSourceTools
diagram SWMET_2022_p99.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SignificantPressureTools_Enum
properties
isRef 0
annotation
documentation
Required. Report the tools that have been used to define significant pressures from point sources. ‘Numerical tools’ includes modelling.
source <xs:element name="swSignificantPressurePointSourceTools" type="SignificantPressureTools_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Report the tools that have been used to define significant pressures from point sources. ‘Numerical tools’ includes modelling.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPressures/swSignificantPressureDiffuseSourceTools
diagram SWMET_2022_p100.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SignificantPressureTools_Enum
properties
isRef 0
annotation
documentation
Required. Report the tools that have been used to define significant pressures from diffuse sources. ‘Numerical tools’ includes modelling.
source <xs:element name="swSignificantPressureDiffuseSourceTools" type="SignificantPressureTools_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Report the tools that have been used to define significant pressures from diffuse sources. ‘Numerical tools’ includes modelling.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPressures/swSignificantPressureWaterAbstractionTools
diagram SWMET_2022_p101.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SignificantPressureTools_Enum
properties
isRef 0
annotation
documentation
Required. Report the tools that have been used to define significant pressures from water abstractions. ‘Numerical tools’ includes modelling.
source <xs:element name="swSignificantPressureWaterAbstractionTools" type="SignificantPressureTools_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Report the tools that have been used to define significant pressures from water abstractions. ‘Numerical tools’ includes modelling.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPressures/swSignificantPressureWaterFlowTools
diagram SWMET_2022_p102.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SignificantPressureTools_Enum
properties
isRef 0
annotation
documentation
Required. Report the tools that have been used to define significant pressures from water flow regulation and morphological alterations. ‘Numerical tools’ includes modelling.
source <xs:element name="swSignificantPressureWaterFlowTools" type="SignificantPressureTools_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Report the tools that have been used to define significant pressures from water flow regulation and morphological alterations. ‘Numerical tools’ includes modelling.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPressures/swSignificantPressureOtherSourceTools
diagram SWMET_2022_p103.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SignificantPressureTools_Enum
properties
isRef 0
annotation
documentation
Required. Report the tools that have been used to define significant pressures from other sources. ‘Numerical tools’ includes modelling.
source <xs:element name="swSignificantPressureOtherSourceTools" type="SignificantPressureTools_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Report the tools that have been used to define significant pressures from other sources. ‘Numerical tools’ includes modelling.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPressures/swSignificanceDefinition
diagram SWMET_2022_p104.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether significance has been defined in terms of thresholds.
source <xs:element name="swSignificanceDefinition" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether significance has been defined in terms of thresholds.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPressures/swSignificanceLinkFailure
diagram SWMET_2022_p105.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether the definition of significance is linked to the potential failure of objectives.
source <xs:element name="swSignificanceLinkFailure" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether the definition of significance is linked to the potential failure of objectives.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPressures/swPressuresReference
diagram SWMET_2022_p106.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Provide references or hyperlinks to the relevant document and sections where other information relating to pressure types can be found. Guidance on what should be included in this document is provided in Section 7.6.3.2.
source <xs:element name="swPressuresReference" type="ReferenceType" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Provide references or hyperlinks to the relevant document and sections where other information relating to pressure types can be found. Guidance on what should be included in this document is provided in Section 7.6.3.2.</xs:documentation>
 
</xs:annotation>
</xs:element>

complexType SWPrioritySubstance
diagram SWMET_2022_p107.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
children psCode psStatusAssessment psMatrix psStandardsUsed psCategoryRW psCategoryLW psCategoryTW psCategoryCW psCategoryTeW psStandardType psValue psUnit psScale psAnalyticalMethod psAnalyticalMethodBAT
used by
element SWMET/SWPrioritySubstance
source <xs:complexType name="SWPrioritySubstance">
 
<xs:sequence>
   
<xs:element name="psCode" type="PS_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Select a Priority Substance from the enumeration list. If there is more than one standard per substance (e.g. because there are different standards for different categories or matrices), the same substance can be reported more than once. Each Priority Substance should be reported at least once. Please note, however, that you should report here ‘Total Aldrin + dieldrin + endrin + isodrin’ and not the individual substances separately, as this is the way in which the EQSs are defined in Directive 2013/39/EU. For the same reason, for PAHs, you should report the individual substances and not ‘Total PAHs…’.
Quality checks: Within-schema check: There has to be at least 1 entry per substance in PS_Enum, except for aldrin, dieldrin, endrin, isodrin and Total PAHs, which should not be reported here, since the reporting should be done for Total aldrin+dieldrin+endrin+isodrin and for individual PAHs.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="psStatusAssessment" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether this Priority Substance has been used in the assessment of chemical status.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="psMatrix" type="Matrix_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Select from the enumeration list the matrix in which the standard for this Priority Substance is applied for the purpose of assessment of chemical status. If the matrix is biota, you can report generically as ‘biota’ or more specifically fish or other biota. Similarly, if the matrix is sediment, you can report generically or specifically for settled or suspended sediment.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="psStandardsUsed" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. For the combination of Priority Substance and matrix being reported, indicate whether the only standards used are all the relevant ones from Directive 2013/39/EU.
Report ‘Yes’ if all standards in Directive 2013/39/EU were used, and only those.
Report ‘No’ if alternative or additional standards (e.g. for particular water categories) were used for that substance and matrix.
Report ‘Not applicable’ only if the priority substance has not been used in the assessment of chemical status.
If alternative and/or additional standards are used, report all the standards used for this Priority Substance using the schema elements below, repeating this whole class for each standard.
Quality checks: Within-schema check: ‘Not applicable’ is a valid option only if psStatusAssessment is ‘No’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="psCategoryRW" type="YesNoCode_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. If an alternative and/or additional standard is used, is the standard being reported used for the assessment of chemical status in rivers?
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="psCategoryLW" type="YesNoCode_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. If an alternative and/or additional standard is used, is the standard being reported used for the assessment of chemical status in lakes?
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="psCategoryTW" type="YesNoCode_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. If an alternative and/or additional standard is used, is the standard being reported used for the assessment of chemical status in transitional waters?
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="psCategoryCW" type="YesNoCode_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>: Conditional. If an alternative and/or additional standard is used, is the standard being reported used for the assessment of chemical status in coastal waters?
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="psCategoryTeW" type="YesNoCode_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>: Conditional. If an alternative and/or additional standard is used, is the standard being reported used for the assessment of chemical status in territorial waters?
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="psStandardType" type="EQStandardType_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. If an alternative and/or additional standard is used, select the type of standard being reported.

‘AA EQS’ = Annual Average Concentration.
‘MAC EQS’ = Maximum Allowable Concentration.
‘Biota EQS’ = Concentration in biota.
Quality check: Conditional check: report if and only if psStandardsUsed is 'No'.
Within-schema check: ‘Biota EQS’ has to be reported if and only if psMatrix is ‘Biota’, ‘Biota –fish’ or ‘Biota – other than fish’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="psValue" type="String20Type" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. If an alternative and/or additional standard is used, report the value or range of the standard applied.
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
Element check: Reporting must be either one single value or a range, written as ‘xxx – yyy’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="psUnit" type="UnitOfMeasure_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. If an alternative and/or additional standard is used, report the unit in which the Priority Substance standard is expressed. Please report ‘{other}’ only if the unit used is not included in the enumeration list.
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="psScale" type="GeographicalScale_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. If an alternative and/or additional standard is used, report the geographical scale at which the standard is applied.
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="psAnalyticalMethod" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether the analytical method used meets the minimum performance criteria laid down in Article 4.1 of the QA/QC Directive (2009/90/EC)77 for the strictest standard applied.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="psAnalyticalMethodBAT" type="YesNoCode_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. If the analytical method does not meet the minimum performance criteria laid down in Article 4(1) of the QA/QC Directive, indicate whether the analytical method complies with the requirements laid down in Article 4(2) of the QA/QC Directive (2009/90/EC) for the strictest standard applied.
Quality checks: Conditional check: Report if and only if psAnalyticalMethod is ‘No’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
 
</xs:sequence>
</xs:complexType>

element SWPrioritySubstance/psCode
diagram SWMET_2022_p108.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type PS_Enum
properties
isRef 0
annotation
documentation
Required. Select a Priority Substance from the enumeration list. If there is more than one standard per substance (e.g. because there are different standards for different categories or matrices), the same substance can be reported more than once. Each Priority Substance should be reported at least once. Please note, however, that you should report here ‘Total Aldrin + dieldrin + endrin + isodrin’ and not the individual substances separately, as this is the way in which the EQSs are defined in Directive 2013/39/EU. For the same reason, for PAHs, you should report the individual substances and not ‘Total PAHs…’.
Quality checks: Within-schema check: There has to be at least 1 entry per substance in PS_Enum, except for aldrin, dieldrin, endrin, isodrin and Total PAHs, which should not be reported here, since the reporting should be done for Total aldrin+dieldrin+endrin+isodrin and for individual PAHs.
source <xs:element name="psCode" type="PS_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Select a Priority Substance from the enumeration list. If there is more than one standard per substance (e.g. because there are different standards for different categories or matrices), the same substance can be reported more than once. Each Priority Substance should be reported at least once. Please note, however, that you should report here ‘Total Aldrin + dieldrin + endrin + isodrin’ and not the individual substances separately, as this is the way in which the EQSs are defined in Directive 2013/39/EU. For the same reason, for PAHs, you should report the individual substances and not ‘Total PAHs…’.
Quality checks: Within-schema check: There has to be at least 1 entry per substance in PS_Enum, except for aldrin, dieldrin, endrin, isodrin and Total PAHs, which should not be reported here, since the reporting should be done for Total aldrin+dieldrin+endrin+isodrin and for individual PAHs.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPrioritySubstance/psStatusAssessment
diagram SWMET_2022_p109.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether this Priority Substance has been used in the assessment of chemical status.
source <xs:element name="psStatusAssessment" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether this Priority Substance has been used in the assessment of chemical status.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPrioritySubstance/psMatrix
diagram SWMET_2022_p110.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type Matrix_Enum
properties
isRef 0
annotation
documentation
Required. Select from the enumeration list the matrix in which the standard for this Priority Substance is applied for the purpose of assessment of chemical status. If the matrix is biota, you can report generically as ‘biota’ or more specifically fish or other biota. Similarly, if the matrix is sediment, you can report generically or specifically for settled or suspended sediment.
source <xs:element name="psMatrix" type="Matrix_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Select from the enumeration list the matrix in which the standard for this Priority Substance is applied for the purpose of assessment of chemical status. If the matrix is biota, you can report generically as ‘biota’ or more specifically fish or other biota. Similarly, if the matrix is sediment, you can report generically or specifically for settled or suspended sediment.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPrioritySubstance/psStandardsUsed
diagram SWMET_2022_p111.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. For the combination of Priority Substance and matrix being reported, indicate whether the only standards used are all the relevant ones from Directive 2013/39/EU.
Report ‘Yes’ if all standards in Directive 2013/39/EU were used, and only those.
Report ‘No’ if alternative or additional standards (e.g. for particular water categories) were used for that substance and matrix.
Report ‘Not applicable’ only if the priority substance has not been used in the assessment of chemical status.
If alternative and/or additional standards are used, report all the standards used for this Priority Substance using the schema elements below, repeating this whole class for each standard.
Quality checks: Within-schema check: ‘Not applicable’ is a valid option only if psStatusAssessment is ‘No’.
source <xs:element name="psStandardsUsed" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. For the combination of Priority Substance and matrix being reported, indicate whether the only standards used are all the relevant ones from Directive 2013/39/EU.
Report ‘Yes’ if all standards in Directive 2013/39/EU were used, and only those.
Report ‘No’ if alternative or additional standards (e.g. for particular water categories) were used for that substance and matrix.
Report ‘Not applicable’ only if the priority substance has not been used in the assessment of chemical status.
If alternative and/or additional standards are used, report all the standards used for this Priority Substance using the schema elements below, repeating this whole class for each standard.
Quality checks: Within-schema check: ‘Not applicable’ is a valid option only if psStatusAssessment is ‘No’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPrioritySubstance/psCategoryRW
diagram SWMET_2022_p112.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. If an alternative and/or additional standard is used, is the standard being reported used for the assessment of chemical status in rivers?
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
source <xs:element name="psCategoryRW" type="YesNoCode_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. If an alternative and/or additional standard is used, is the standard being reported used for the assessment of chemical status in rivers?
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPrioritySubstance/psCategoryLW
diagram SWMET_2022_p113.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. If an alternative and/or additional standard is used, is the standard being reported used for the assessment of chemical status in lakes?
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
source <xs:element name="psCategoryLW" type="YesNoCode_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. If an alternative and/or additional standard is used, is the standard being reported used for the assessment of chemical status in lakes?
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPrioritySubstance/psCategoryTW
diagram SWMET_2022_p114.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. If an alternative and/or additional standard is used, is the standard being reported used for the assessment of chemical status in transitional waters?
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
source <xs:element name="psCategoryTW" type="YesNoCode_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. If an alternative and/or additional standard is used, is the standard being reported used for the assessment of chemical status in transitional waters?
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPrioritySubstance/psCategoryCW
diagram SWMET_2022_p115.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
: Conditional. If an alternative and/or additional standard is used, is the standard being reported used for the assessment of chemical status in coastal waters?
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
source <xs:element name="psCategoryCW" type="YesNoCode_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>: Conditional. If an alternative and/or additional standard is used, is the standard being reported used for the assessment of chemical status in coastal waters?
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPrioritySubstance/psCategoryTeW
diagram SWMET_2022_p116.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
: Conditional. If an alternative and/or additional standard is used, is the standard being reported used for the assessment of chemical status in territorial waters?
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
source <xs:element name="psCategoryTeW" type="YesNoCode_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>: Conditional. If an alternative and/or additional standard is used, is the standard being reported used for the assessment of chemical status in territorial waters?
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPrioritySubstance/psStandardType
diagram SWMET_2022_p117.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type EQStandardType_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. If an alternative and/or additional standard is used, select the type of standard being reported.

‘AA EQS’ = Annual Average Concentration.
‘MAC EQS’ = Maximum Allowable Concentration.
‘Biota EQS’ = Concentration in biota.
Quality check: Conditional check: report if and only if psStandardsUsed is 'No'.
Within-schema check: ‘Biota EQS’ has to be reported if and only if psMatrix is ‘Biota’, ‘Biota –fish’ or ‘Biota – other than fish’.
source <xs:element name="psStandardType" type="EQStandardType_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. If an alternative and/or additional standard is used, select the type of standard being reported.

‘AA EQS’ = Annual Average Concentration.
‘MAC EQS’ = Maximum Allowable Concentration.
‘Biota EQS’ = Concentration in biota.
Quality check: Conditional check: report if and only if psStandardsUsed is 'No'.
Within-schema check: ‘Biota EQS’ has to be reported if and only if psMatrix is ‘Biota’, ‘Biota –fish’ or ‘Biota – other than fish’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPrioritySubstance/psValue
diagram SWMET_2022_p118.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type String20Type
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. If an alternative and/or additional standard is used, report the value or range of the standard applied.
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
Element check: Reporting must be either one single value or a range, written as ‘xxx – yyy’.
source <xs:element name="psValue" type="String20Type" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. If an alternative and/or additional standard is used, report the value or range of the standard applied.
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
Element check: Reporting must be either one single value or a range, written as ‘xxx – yyy’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPrioritySubstance/psUnit
diagram SWMET_2022_p119.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type UnitOfMeasure_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. If an alternative and/or additional standard is used, report the unit in which the Priority Substance standard is expressed. Please report ‘{other}’ only if the unit used is not included in the enumeration list.
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
source <xs:element name="psUnit" type="UnitOfMeasure_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. If an alternative and/or additional standard is used, report the unit in which the Priority Substance standard is expressed. Please report ‘{other}’ only if the unit used is not included in the enumeration list.
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPrioritySubstance/psScale
diagram SWMET_2022_p120.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type GeographicalScale_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. If an alternative and/or additional standard is used, report the geographical scale at which the standard is applied.
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
source <xs:element name="psScale" type="GeographicalScale_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. If an alternative and/or additional standard is used, report the geographical scale at which the standard is applied.
Quality checks: Conditional check: report if and only if psStandardsUsed is 'No'.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPrioritySubstance/psAnalyticalMethod
diagram SWMET_2022_p121.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether the analytical method used meets the minimum performance criteria laid down in Article 4.1 of the QA/QC Directive (2009/90/EC)77 for the strictest standard applied.
source <xs:element name="psAnalyticalMethod" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether the analytical method used meets the minimum performance criteria laid down in Article 4.1 of the QA/QC Directive (2009/90/EC)77 for the strictest standard applied.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWPrioritySubstance/psAnalyticalMethodBAT
diagram SWMET_2022_p122.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. If the analytical method does not meet the minimum performance criteria laid down in Article 4(1) of the QA/QC Directive, indicate whether the analytical method complies with the requirements laid down in Article 4(2) of the QA/QC Directive (2009/90/EC) for the strictest standard applied.
Quality checks: Conditional check: Report if and only if psAnalyticalMethod is ‘No’.
source <xs:element name="psAnalyticalMethodBAT" type="YesNoCode_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. If the analytical method does not meet the minimum performance criteria laid down in Article 4(1) of the QA/QC Directive, indicate whether the analytical method complies with the requirements laid down in Article 4(2) of the QA/QC Directive (2009/90/EC) for the strictest standard applied.
Quality checks: Conditional check: Report if and only if psAnalyticalMethod is ‘No’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

complexType SWRBSP
diagram SWMET_2022_p123.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
children rbspCode rbspOther rbspMatrix rbspCategoryRW rbspCategoryLW rbspCategoryTW rbspCategoryCW rbspStandardType rbspValue rbspUnit rbspScale rbspTechGuidance rbspAnalyticalMethod rbspAnalyticalMethodBAT
used by
element SWMET/SWRBSP
annotation
documentation
Report each good-moderate EQS for each River Basin Specific Pollutant. Report the whole class once for each combination of RBSP, matrix, standard and category. EQSs should be reported here only for the substances reported in the Monitoring schema (class ChemicalMonitoring). If standards were developed for substances which are not monitored, information about those should be included in the RBMP or background documents (see section 0).
source <xs:complexType name="SWRBSP">
 
<xs:annotation>
   
<xs:documentation>Report each good-moderate EQS for each River Basin Specific Pollutant. Report the whole class once for each combination of RBSP, matrix, standard and category. EQSs should be reported here only for the substances reported in the Monitoring schema (class ChemicalMonitoring). If standards were developed for substances which are not monitored, information about those should be included in the RBMP or background documents (see section 0).</xs:documentation>
 
</xs:annotation>
 
<xs:sequence>
   
<xs:element name="rbspCode" type="RBSP_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Select each River Basin Specific Pollutant (RBSP) with a good-moderate EQS from the enumeration list. If there is more than one standard per substance (e.g. because there are different standards for different categories or matrices), the same RBSP can be reported more than once.
Please make sure that the option ‘EEA_00-00-0 - Other chemical parameter’ is selected only if the pollutant in question is not included in the enumeration list.
Quality check: Cross-schema check: the RBSP codes reported here have to be consistent with those reported under Monitoring/ChemicalEcologicalQuantitativeMonitoring/parameterCode.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="rbspOther" type="String250Type" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. If ‘rbspCode’ is ‘EEA_00-00-0 - Other chemical parameter’ please indicate in this field the CAS number (if relevant) and the name of the RBSP. CAS numbers may be found or checked in the following websites:
  ECHA, https://echa.europa.eu/information-on-chemicals/ec-inventory;
  NIST Chemistry WebBook, https://webbook.nist.gov/chemistry/cas-ser/.
Quality check: Conditional check: report if and only if ‘rbspCode’ is ‘EEA_00-00-0 - Other chemical parameter’.
Cross-schema check: the RBSP codes reported here have to be consistent with those reported under Monitoring/ChemicalEcologicalQuantitativeMonitoring/parameterOther.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="rbspMatrix" type="Matrix_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Select from the enumeration list the matrix in which the standard for the RBSP is applied for the purpose of assessment of ecological status. If the matrix is biota, you can report generically as ‘biota’ or more specifically fish or other biota. Similarly, if the matrix is sediment, you can report generically or specifically for settled or suspended sediment.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="rbspCategoryRW" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Does the standard apply to rivers? </xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="rbspCategoryLW" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Does the standard apply to lakes? </xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="rbspCategoryTW" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Does the standard apply to transitional waters? </xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="rbspCategoryCW" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Does the standard apply to coastal waters? </xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="rbspStandardType" type="EQStandardType_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Select the type of standard applied for each RBSP and matrix. 'AA-EQS' = Annual Average EQS. 'MAC-EQS' = Maximum Allowable Concentration EQS. 'Both' = Both AA and MAC EQS 'Other' = Other type of standard</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="rbspValue" type="String100Type">
     
<xs:annotation>
       
<xs:documentation>Required. Report the value or range of the RBSP standard representing the good-moderate boundary only.
Quality checks: Element check: Reporting must be either one single value or a range, written as ‘xxx – yyy’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="rbspUnit" type="UnitOfMeasure_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Report the unit in which the RBSP standard is expressed. Please report ‘{other}’ only if the unit used is not included in the enumeration list.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="rbspScale" type="GeographicalScale_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Report the geographical scale at which the RBSP standard is applied.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="rbspTechGuidance" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether the RBSP standard has been derived in accordance with the 2011 Technical Guidance Document No 27.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="rbspAnalyticalMethod" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether the analytical method used meets the minimum performance criteria laid down in Article 4.1 of the QA/QC Directive (2009/90/EC)68 for the strictest standard applied.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="rbspAnalyticalMethodBAT" type="YesNoCode_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. If the analytical method does not meet the minimum performance criteria laid down in Article 4(1) of the QA/QC Directive, indicate whether the analytical method complies with the requirements laid down in Article 4(2) of the QA/QC Directive (2009/90/EC) for the strictest standard applied.
Quality checks: Conditional check: Report if and only if rbspAnalyticalMethod is ‘No’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
 
</xs:sequence>
</xs:complexType>

element SWRBSP/rbspCode
diagram SWMET_2022_p124.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type RBSP_Enum
properties
isRef 0
annotation
documentation
Required. Select each River Basin Specific Pollutant (RBSP) with a good-moderate EQS from the enumeration list. If there is more than one standard per substance (e.g. because there are different standards for different categories or matrices), the same RBSP can be reported more than once.
Please make sure that the option ‘EEA_00-00-0 - Other chemical parameter’ is selected only if the pollutant in question is not included in the enumeration list.
Quality check: Cross-schema check: the RBSP codes reported here have to be consistent with those reported under Monitoring/ChemicalEcologicalQuantitativeMonitoring/parameterCode.
source <xs:element name="rbspCode" type="RBSP_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Select each River Basin Specific Pollutant (RBSP) with a good-moderate EQS from the enumeration list. If there is more than one standard per substance (e.g. because there are different standards for different categories or matrices), the same RBSP can be reported more than once.
Please make sure that the option ‘EEA_00-00-0 - Other chemical parameter’ is selected only if the pollutant in question is not included in the enumeration list.
Quality check: Cross-schema check: the RBSP codes reported here have to be consistent with those reported under Monitoring/ChemicalEcologicalQuantitativeMonitoring/parameterCode.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWRBSP/rbspOther
diagram SWMET_2022_p125.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type String250Type
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. If ‘rbspCode’ is ‘EEA_00-00-0 - Other chemical parameter’ please indicate in this field the CAS number (if relevant) and the name of the RBSP. CAS numbers may be found or checked in the following websites:
  ECHA, https://echa.europa.eu/information-on-chemicals/ec-inventory;
  NIST Chemistry WebBook, https://webbook.nist.gov/chemistry/cas-ser/.
Quality check: Conditional check: report if and only if ‘rbspCode’ is ‘EEA_00-00-0 - Other chemical parameter’.
Cross-schema check: the RBSP codes reported here have to be consistent with those reported under Monitoring/ChemicalEcologicalQuantitativeMonitoring/parameterOther.
source <xs:element name="rbspOther" type="String250Type" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. If ‘rbspCode’ is ‘EEA_00-00-0 - Other chemical parameter’ please indicate in this field the CAS number (if relevant) and the name of the RBSP. CAS numbers may be found or checked in the following websites:
  ECHA, https://echa.europa.eu/information-on-chemicals/ec-inventory;
  NIST Chemistry WebBook, https://webbook.nist.gov/chemistry/cas-ser/.
Quality check: Conditional check: report if and only if ‘rbspCode’ is ‘EEA_00-00-0 - Other chemical parameter’.
Cross-schema check: the RBSP codes reported here have to be consistent with those reported under Monitoring/ChemicalEcologicalQuantitativeMonitoring/parameterOther.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWRBSP/rbspMatrix
diagram SWMET_2022_p126.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type Matrix_Enum
properties
isRef 0
annotation
documentation
Required. Select from the enumeration list the matrix in which the standard for the RBSP is applied for the purpose of assessment of ecological status. If the matrix is biota, you can report generically as ‘biota’ or more specifically fish or other biota. Similarly, if the matrix is sediment, you can report generically or specifically for settled or suspended sediment.
source <xs:element name="rbspMatrix" type="Matrix_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Select from the enumeration list the matrix in which the standard for the RBSP is applied for the purpose of assessment of ecological status. If the matrix is biota, you can report generically as ‘biota’ or more specifically fish or other biota. Similarly, if the matrix is sediment, you can report generically or specifically for settled or suspended sediment.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWRBSP/rbspCategoryRW
diagram SWMET_2022_p127.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Does the standard apply to rivers?
source <xs:element name="rbspCategoryRW" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Does the standard apply to rivers? </xs:documentation>
 
</xs:annotation>
</xs:element>

element SWRBSP/rbspCategoryLW
diagram SWMET_2022_p128.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Does the standard apply to lakes?
source <xs:element name="rbspCategoryLW" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Does the standard apply to lakes? </xs:documentation>
 
</xs:annotation>
</xs:element>

element SWRBSP/rbspCategoryTW
diagram SWMET_2022_p129.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Does the standard apply to transitional waters?
source <xs:element name="rbspCategoryTW" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Does the standard apply to transitional waters? </xs:documentation>
 
</xs:annotation>
</xs:element>

element SWRBSP/rbspCategoryCW
diagram SWMET_2022_p130.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Does the standard apply to coastal waters?
source <xs:element name="rbspCategoryCW" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Does the standard apply to coastal waters? </xs:documentation>
 
</xs:annotation>
</xs:element>

element SWRBSP/rbspStandardType
diagram SWMET_2022_p131.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type EQStandardType_Enum
properties
isRef 0
annotation
documentation
Required. Select the type of standard applied for each RBSP and matrix. 'AA-EQS' = Annual Average EQS. 'MAC-EQS' = Maximum Allowable Concentration EQS. 'Both' = Both AA and MAC EQS 'Other' = Other type of standard
source <xs:element name="rbspStandardType" type="EQStandardType_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Select the type of standard applied for each RBSP and matrix. 'AA-EQS' = Annual Average EQS. 'MAC-EQS' = Maximum Allowable Concentration EQS. 'Both' = Both AA and MAC EQS 'Other' = Other type of standard</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWRBSP/rbspValue
diagram SWMET_2022_p132.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type String100Type
properties
isRef 0
annotation
documentation
Required. Report the value or range of the RBSP standard representing the good-moderate boundary only.
Quality checks: Element check: Reporting must be either one single value or a range, written as ‘xxx – yyy’.
source <xs:element name="rbspValue" type="String100Type">
 
<xs:annotation>
   
<xs:documentation>Required. Report the value or range of the RBSP standard representing the good-moderate boundary only.
Quality checks: Element check: Reporting must be either one single value or a range, written as ‘xxx – yyy’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWRBSP/rbspUnit
diagram SWMET_2022_p133.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type UnitOfMeasure_Enum
properties
isRef 0
annotation
documentation
Required. Report the unit in which the RBSP standard is expressed. Please report ‘{other}’ only if the unit used is not included in the enumeration list.
source <xs:element name="rbspUnit" type="UnitOfMeasure_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Report the unit in which the RBSP standard is expressed. Please report ‘{other}’ only if the unit used is not included in the enumeration list.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWRBSP/rbspScale
diagram SWMET_2022_p134.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type GeographicalScale_Enum
properties
isRef 0
annotation
documentation
Required. Report the geographical scale at which the RBSP standard is applied.
source <xs:element name="rbspScale" type="GeographicalScale_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Report the geographical scale at which the RBSP standard is applied.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWRBSP/rbspTechGuidance
diagram SWMET_2022_p135.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether the RBSP standard has been derived in accordance with the 2011 Technical Guidance Document No 27.
source <xs:element name="rbspTechGuidance" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether the RBSP standard has been derived in accordance with the 2011 Technical Guidance Document No 27.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWRBSP/rbspAnalyticalMethod
diagram SWMET_2022_p136.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether the analytical method used meets the minimum performance criteria laid down in Article 4.1 of the QA/QC Directive (2009/90/EC)68 for the strictest standard applied.
source <xs:element name="rbspAnalyticalMethod" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether the analytical method used meets the minimum performance criteria laid down in Article 4.1 of the QA/QC Directive (2009/90/EC)68 for the strictest standard applied.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWRBSP/rbspAnalyticalMethodBAT
diagram SWMET_2022_p137.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. If the analytical method does not meet the minimum performance criteria laid down in Article 4(1) of the QA/QC Directive, indicate whether the analytical method complies with the requirements laid down in Article 4(2) of the QA/QC Directive (2009/90/EC) for the strictest standard applied.
Quality checks: Conditional check: Report if and only if rbspAnalyticalMethod is ‘No’.
source <xs:element name="rbspAnalyticalMethodBAT" type="YesNoCode_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. If the analytical method does not meet the minimum performance criteria laid down in Article 4(1) of the QA/QC Directive, indicate whether the analytical method complies with the requirements laid down in Article 4(2) of the QA/QC Directive (2009/90/EC) for the strictest standard applied.
Quality checks: Conditional check: Report if and only if rbspAnalyticalMethod is ‘No’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

complexType SWSupportingQE
diagram SWMET_2022_p138.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
children supportingQECode supportingQESensitivityBQE
used by
element SWMET/SWSupportingQE
annotation
documentation
Report information on assessment methods for supporting QEs. Report the whole class once for each supporting QE that has been assessed.
source <xs:complexType name="SWSupportingQE">
 
<xs:annotation>
   
<xs:documentation>Report information on assessment methods for supporting QEs. Report the whole class once for each supporting QE that has been assessed. </xs:documentation>
 
</xs:annotation>
 
<xs:sequence>
   
<xs:element name="supportingQECode" type="SupportingQE_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Select each supporting hydromorphological and physico-chemical QE in turn from the enumeration list. Report only the supporting QEs that have been assessed.
Quality checks: Each supporting QE should be chosen only once.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="supportingQESensitivityBQE" type="SensitivityYesNo_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether the classification boundaries for this supporting QE are related to the class boundaries for the sensitive BQEs. There may be cases in which the link between classification boundaries for the supporting QE and the class boundaries for the sensitive BQEs exists for natural water bodies but not for AWB or HMWB or the contrary, orit exists for some water categories but not for others. In those cases, you should report ‘Yes, in some cases’. </xs:documentation>
     
</xs:annotation>
   
</xs:element>
 
</xs:sequence>
</xs:complexType>

element SWSupportingQE/supportingQECode
diagram SWMET_2022_p139.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SupportingQE_Enum
properties
isRef 0
annotation
documentation
Required. Select each supporting hydromorphological and physico-chemical QE in turn from the enumeration list. Report only the supporting QEs that have been assessed.
Quality checks: Each supporting QE should be chosen only once.
source <xs:element name="supportingQECode" type="SupportingQE_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Select each supporting hydromorphological and physico-chemical QE in turn from the enumeration list. Report only the supporting QEs that have been assessed.
Quality checks: Each supporting QE should be chosen only once.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWSupportingQE/supportingQESensitivityBQE
diagram SWMET_2022_p140.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SensitivityYesNo_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether the classification boundaries for this supporting QE are related to the class boundaries for the sensitive BQEs. There may be cases in which the link between classification boundaries for the supporting QE and the class boundaries for the sensitive BQEs exists for natural water bodies but not for AWB or HMWB or the contrary, orit exists for some water categories but not for others. In those cases, you should report ‘Yes, in some cases’.
source <xs:element name="supportingQESensitivityBQE" type="SensitivityYesNo_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether the classification boundaries for this supporting QE are related to the class boundaries for the sensitive BQEs. There may be cases in which the link between classification boundaries for the supporting QE and the class boundaries for the sensitive BQEs exists for natural water bodies but not for AWB or HMWB or the contrary, orit exists for some water categories but not for others. In those cases, you should report ‘Yes, in some cases’. </xs:documentation>
 
</xs:annotation>
</xs:element>

complexType SWTargetedQ
diagram SWMET_2022_p141.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
children oneOutAllOut groupingExtrapolation gepDefined gepLevel gepApproach gepBiology mitigationMeasures bqeForMEPGEP gesGepComparison ecologicalStatusMethodReference gepMethodReference driversFailureEcologicalStatusPotentialReference
used by
element SWMET/SWTargetedQ
annotation
documentation
Report targeted questions on the classification of ecological status and the definition of good ecological potential (GEP).
source <xs:complexType name="SWTargetedQ">
 
<xs:annotation>
   
<xs:documentation>Report targeted questions on the classification of ecological status and the definition of good ecological potential (GEP). </xs:documentation>
 
</xs:annotation>
 
<xs:sequence>
   
<xs:element name="oneOutAllOut" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether the ‘one-out, all-out’ principle has been applied in deriving the overall classification of the ecological status of water bodies.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="groupingExtrapolation" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether grouping of water bodies has been used in extrapolating the assessment and classification of ecological status from monitored water bodies to water bodies with no monitoring sites.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="gepDefined" type="YesNoCode_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether good ecological potential (GEP) has been defined.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="gepLevel" type="GEPLevel_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. Indicate at what level GEP has been defined.  Quality checks: Conditional check: Report if gepDefined is 'Yes'.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="gepApproach" type="GEPApproach_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. If GEP has been defined, report the approach that has been adopted for defining GEP.
Quality checks: Conditional check: Report if and only if gepDefined is ‘Yes’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="gepBiology" type="YesNoCode_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. If GEP has been defined, indicate whether GEP has been defined in terms of biology (BQEs).
Quality checks: Conditional check: Report if and only if gepDefined is ‘Yes’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="mitigationMeasures" type="MitigationMeasure_Enum" minOccurs="0" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Conditional. If GEP has been defined, select from the enumeration list the mitigation measures without significant adverse effects on the use or the wider environment that have been identified to define GEP. More than one mitigation measure may be selected.
Quality checks: Conditional check: Report if and only if gepDefined is ‘Yes’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="bqeForMEPGEP" type="BQE_Enum" minOccurs="0" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Conditional. If GEP has been defined, select from the enumeration list the BQEs for which biological values were derived to define maximum ecological potential (MEP) and GEP. More than one BQE may be selected.
Quality checks: Conditional check: Report if and only if gepDefined is ‘Yes’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="gesGepComparison" type="YesNoCode_Enum" minOccurs="0">
     
<xs:annotation>
       
<xs:documentation>Conditional. If GEP has been defined, indicate whether good ecological status (GES) and GEP have been compared, e.g. measured on a common scale69.
If ‘Yes’, provide a document describing the comparison that has been carried out.
If ‘No’, provide a document explaining why a comparison has not been carried out.
The documents in question should be reported using the schema element gepMethodReference.
Quality checks: Conditional check: Report if and only if gepDefined is ‘Yes’.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="ecologicalStatusMethodReference" type="ReferenceType" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Provide references or hyperlinks to technical documents describing the methodologies used for the assessment of ecological status. Guidance on what should be included in these documents is provided in Section 7.3.3.2.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="gepMethodReference" type="ReferenceType" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Provide references or hyperlinks to technical documents describing the methodologies used for the assessment of ecological potential. Guidance on what should be included in this document is provided in Section 7.3.3.2.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="driversFailureEcologicalStatusPotentialReference" type="ReferenceType" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. Provide references or hyperlinks to technical documents describing the drivers and impacts behind the failures of good ecological status and potential. Guidance on what should be included in these documents is provided in Section 7.3.3.2.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
 
</xs:sequence>
</xs:complexType>

element SWTargetedQ/oneOutAllOut
diagram SWMET_2022_p142.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether the ‘one-out, all-out’ principle has been applied in deriving the overall classification of the ecological status of water bodies.
source <xs:element name="oneOutAllOut" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether the ‘one-out, all-out’ principle has been applied in deriving the overall classification of the ecological status of water bodies.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWTargetedQ/groupingExtrapolation
diagram SWMET_2022_p143.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether grouping of water bodies has been used in extrapolating the assessment and classification of ecological status from monitored water bodies to water bodies with no monitoring sites.
source <xs:element name="groupingExtrapolation" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether grouping of water bodies has been used in extrapolating the assessment and classification of ecological status from monitored water bodies to water bodies with no monitoring sites.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWTargetedQ/gepDefined
diagram SWMET_2022_p144.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether good ecological potential (GEP) has been defined.
source <xs:element name="gepDefined" type="YesNoCode_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether good ecological potential (GEP) has been defined.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWTargetedQ/gepLevel
diagram SWMET_2022_p145.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type GEPLevel_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. Indicate at what level GEP has been defined.  Quality checks: Conditional check: Report if gepDefined is 'Yes'.
source <xs:element name="gepLevel" type="GEPLevel_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. Indicate at what level GEP has been defined.  Quality checks: Conditional check: Report if gepDefined is 'Yes'.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWTargetedQ/gepApproach
diagram SWMET_2022_p146.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type GEPApproach_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. If GEP has been defined, report the approach that has been adopted for defining GEP.
Quality checks: Conditional check: Report if and only if gepDefined is ‘Yes’.
source <xs:element name="gepApproach" type="GEPApproach_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. If GEP has been defined, report the approach that has been adopted for defining GEP.
Quality checks: Conditional check: Report if and only if gepDefined is ‘Yes’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWTargetedQ/gepBiology
diagram SWMET_2022_p147.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. If GEP has been defined, indicate whether GEP has been defined in terms of biology (BQEs).
Quality checks: Conditional check: Report if and only if gepDefined is ‘Yes’.
source <xs:element name="gepBiology" type="YesNoCode_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. If GEP has been defined, indicate whether GEP has been defined in terms of biology (BQEs).
Quality checks: Conditional check: Report if and only if gepDefined is ‘Yes’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWTargetedQ/mitigationMeasures
diagram SWMET_2022_p148.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type MitigationMeasure_Enum
properties
isRef 0
minOcc 0
maxOcc unbounded
annotation
documentation
Conditional. If GEP has been defined, select from the enumeration list the mitigation measures without significant adverse effects on the use or the wider environment that have been identified to define GEP. More than one mitigation measure may be selected.
Quality checks: Conditional check: Report if and only if gepDefined is ‘Yes’.
source <xs:element name="mitigationMeasures" type="MitigationMeasure_Enum" minOccurs="0" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Conditional. If GEP has been defined, select from the enumeration list the mitigation measures without significant adverse effects on the use or the wider environment that have been identified to define GEP. More than one mitigation measure may be selected.
Quality checks: Conditional check: Report if and only if gepDefined is ‘Yes’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWTargetedQ/bqeForMEPGEP
diagram SWMET_2022_p149.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type BQE_Enum
properties
isRef 0
minOcc 0
maxOcc unbounded
annotation
documentation
Conditional. If GEP has been defined, select from the enumeration list the BQEs for which biological values were derived to define maximum ecological potential (MEP) and GEP. More than one BQE may be selected.
Quality checks: Conditional check: Report if and only if gepDefined is ‘Yes’.
source <xs:element name="bqeForMEPGEP" type="BQE_Enum" minOccurs="0" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Conditional. If GEP has been defined, select from the enumeration list the BQEs for which biological values were derived to define maximum ecological potential (MEP) and GEP. More than one BQE may be selected.
Quality checks: Conditional check: Report if and only if gepDefined is ‘Yes’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWTargetedQ/gesGepComparison
diagram SWMET_2022_p150.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type YesNoCode_Enum
properties
isRef 0
minOcc 0
maxOcc 1
annotation
documentation
Conditional. If GEP has been defined, indicate whether good ecological status (GES) and GEP have been compared, e.g. measured on a common scale69.
If ‘Yes’, provide a document describing the comparison that has been carried out.
If ‘No’, provide a document explaining why a comparison has not been carried out.
The documents in question should be reported using the schema element gepMethodReference.
Quality checks: Conditional check: Report if and only if gepDefined is ‘Yes’.
source <xs:element name="gesGepComparison" type="YesNoCode_Enum" minOccurs="0">
 
<xs:annotation>
   
<xs:documentation>Conditional. If GEP has been defined, indicate whether good ecological status (GES) and GEP have been compared, e.g. measured on a common scale69.
If ‘Yes’, provide a document describing the comparison that has been carried out.
If ‘No’, provide a document explaining why a comparison has not been carried out.
The documents in question should be reported using the schema element gepMethodReference.
Quality checks: Conditional check: Report if and only if gepDefined is ‘Yes’.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWTargetedQ/ecologicalStatusMethodReference
diagram SWMET_2022_p151.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Provide references or hyperlinks to technical documents describing the methodologies used for the assessment of ecological status. Guidance on what should be included in these documents is provided in Section 7.3.3.2.
source <xs:element name="ecologicalStatusMethodReference" type="ReferenceType" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Provide references or hyperlinks to technical documents describing the methodologies used for the assessment of ecological status. Guidance on what should be included in these documents is provided in Section 7.3.3.2.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWTargetedQ/gepMethodReference
diagram SWMET_2022_p152.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Provide references or hyperlinks to technical documents describing the methodologies used for the assessment of ecological potential. Guidance on what should be included in this document is provided in Section 7.3.3.2.
source <xs:element name="gepMethodReference" type="ReferenceType" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Provide references or hyperlinks to technical documents describing the methodologies used for the assessment of ecological potential. Guidance on what should be included in this document is provided in Section 7.3.3.2.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWTargetedQ/driversFailureEcologicalStatusPotentialReference
diagram SWMET_2022_p153.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type ReferenceType
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. Provide references or hyperlinks to technical documents describing the drivers and impacts behind the failures of good ecological status and potential. Guidance on what should be included in these documents is provided in Section 7.3.3.2.
source <xs:element name="driversFailureEcologicalStatusPotentialReference" type="ReferenceType" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. Provide references or hyperlinks to technical documents describing the drivers and impacts behind the failures of good ecological status and potential. Guidance on what should be included in these documents is provided in Section 7.3.3.2.</xs:documentation>
 
</xs:annotation>
</xs:element>

complexType SWType
diagram SWMET_2022_p154.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
children swTypeCode swTypeDescription swIntercalibrationType swTypeCategory swTypeSpecificReferenceConditionsForBQEs swTypeSpecificHyMoConditions swTypeSpecificPhysChemConditions
used by
element SWMET/SWType
annotation
documentation
Information reported for each type of surface water body.
source <xs:complexType name="SWType">
 
<xs:annotation>
   
<xs:documentation>Information reported for each type of surface water body. </xs:documentation>
 
</xs:annotation>
 
<xs:sequence>
   
<xs:element name="swTypeCode" type="String100Type">
     
<xs:annotation>
       
<xs:documentation>Required. Member State code for each characterisation type of surface water bodies. If typology for HMWBs and/or AWBs has been derived and used it should be reported here.
For the sake of clarity, please report only the characterisation types that were used for one or more surface water bodies.
Quality assurance checks: Cross-schema check: The reported swTypeCode must be consistent with the codes reported in SWB/SurfaceWaterBody/surfaceWaterBodyTypeCode.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swTypeDescription" type="String1000Type">
     
<xs:annotation>
       
<xs:documentation>Required. Briefly describe the type (e.g. ‘small, lowland, siliceous rivers’). Provide a reference to where further details can be found in the RBMP and/or background documents.</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swIntercalibrationType" type="SWIntercalibrationType_Enum" maxOccurs="unbounded">
     
<xs:annotation>
       
<xs:documentation>Required. If the surface water body type corresponds with an intercalibration type, report the intercalibration type code (not name).
The intercalibration type reported in this element must be appropriate to the surface water body’s Category.
If there is no corresponding intercalibration type, select ‘Not applicable’.
Quality checks: Cross-schema check: swIntercalibrationType must be consistent with the codes reported in SWB/SurfaceWaterBody/surfaceWaterBodyIntercalibrationType. The intercalibration types reported here for a certain national characterisation type have to include all the intercalibration types reported in SWB/SurfaceWaterBody for different water bodies of the type in question.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swTypeCategory" type="SWCategory_Enum">
     
<xs:annotation>
       
<xs:documentation>Report the category of surface water bodies to which this type refers.
‘RW’ = River water bodies.
‘TW’ = Transitional water bodies.
‘LW’ = Lake water bodies.
‘CW’ = Coastal water bodies.
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swTypeSpecificReferenceConditionsForBQEs" type="AllSomeNone_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether type-specific reference conditions have been established for this surface water type for all relevant BQEs:
‘All’: Reference conditions have been set for this type for all relevant BQEs
‘Some’: Reference conditions have been set for this type for some BQEs
‘None’: Reference conditions have not been set for this type for any BQEs
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swTypeSpecificHyMoConditions" type="AllSomeNone_Enum">
     
<xs:annotation>
       
<xs:documentation>: Required. Indicate whether type-specific hydromorphological conditions have been established for this surface water type for all relevant hydromorphological QEs.
‘All’: Hydromorphological conditions have been set for this type for all relevant hydromorphological QEs
‘Some’: Hydromorphological conditions have been set for this type for some hydromorphological QEs
‘None’: Hydromorphological conditions have not been set for this type for any hydromorphological QEs
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
   
<xs:element name="swTypeSpecificPhysChemConditions" type="AllSomeNone_Enum">
     
<xs:annotation>
       
<xs:documentation>Required. Indicate whether type-specific reference conditions have been established for this surface water type for all relevant physico-chemical QEs:
‘All’: Physicochemical conditions have been set for this type for all relevant physico-chemical QEs
‘Some’: Physicochemical conditions have been set for this type for some physico-chemical QEs
‘None’: Physicochemical conditions have not been set for this type for any physico-chemical QEs
</xs:documentation>
     
</xs:annotation>
   
</xs:element>
 
</xs:sequence>
</xs:complexType>

element SWType/swTypeCode
diagram SWMET_2022_p155.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type String100Type
properties
isRef 0
annotation
documentation
Required. Member State code for each characterisation type of surface water bodies. If typology for HMWBs and/or AWBs has been derived and used it should be reported here.
For the sake of clarity, please report only the characterisation types that were used for one or more surface water bodies.
Quality assurance checks: Cross-schema check: The reported swTypeCode must be consistent with the codes reported in SWB/SurfaceWaterBody/surfaceWaterBodyTypeCode.
source <xs:element name="swTypeCode" type="String100Type">
 
<xs:annotation>
   
<xs:documentation>Required. Member State code for each characterisation type of surface water bodies. If typology for HMWBs and/or AWBs has been derived and used it should be reported here.
For the sake of clarity, please report only the characterisation types that were used for one or more surface water bodies.
Quality assurance checks: Cross-schema check: The reported swTypeCode must be consistent with the codes reported in SWB/SurfaceWaterBody/surfaceWaterBodyTypeCode.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWType/swTypeDescription
diagram SWMET_2022_p156.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type String1000Type
properties
isRef 0
annotation
documentation
Required. Briefly describe the type (e.g. ‘small, lowland, siliceous rivers’). Provide a reference to where further details can be found in the RBMP and/or background documents.
source <xs:element name="swTypeDescription" type="String1000Type">
 
<xs:annotation>
   
<xs:documentation>Required. Briefly describe the type (e.g. ‘small, lowland, siliceous rivers’). Provide a reference to where further details can be found in the RBMP and/or background documents.</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWType/swIntercalibrationType
diagram SWMET_2022_p157.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SWIntercalibrationType_Enum
properties
isRef 0
minOcc 1
maxOcc unbounded
annotation
documentation
Required. If the surface water body type corresponds with an intercalibration type, report the intercalibration type code (not name).
The intercalibration type reported in this element must be appropriate to the surface water body’s Category.
If there is no corresponding intercalibration type, select ‘Not applicable’.
Quality checks: Cross-schema check: swIntercalibrationType must be consistent with the codes reported in SWB/SurfaceWaterBody/surfaceWaterBodyIntercalibrationType. The intercalibration types reported here for a certain national characterisation type have to include all the intercalibration types reported in SWB/SurfaceWaterBody for different water bodies of the type in question.
source <xs:element name="swIntercalibrationType" type="SWIntercalibrationType_Enum" maxOccurs="unbounded">
 
<xs:annotation>
   
<xs:documentation>Required. If the surface water body type corresponds with an intercalibration type, report the intercalibration type code (not name).
The intercalibration type reported in this element must be appropriate to the surface water body’s Category.
If there is no corresponding intercalibration type, select ‘Not applicable’.
Quality checks: Cross-schema check: swIntercalibrationType must be consistent with the codes reported in SWB/SurfaceWaterBody/surfaceWaterBodyIntercalibrationType. The intercalibration types reported here for a certain national characterisation type have to include all the intercalibration types reported in SWB/SurfaceWaterBody for different water bodies of the type in question.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWType/swTypeCategory
diagram SWMET_2022_p158.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type SWCategory_Enum
properties
isRef 0
annotation
documentation
Report the category of surface water bodies to which this type refers.
‘RW’ = River water bodies.
‘TW’ = Transitional water bodies.
‘LW’ = Lake water bodies.
‘CW’ = Coastal water bodies.
source <xs:element name="swTypeCategory" type="SWCategory_Enum">
 
<xs:annotation>
   
<xs:documentation>Report the category of surface water bodies to which this type refers.
‘RW’ = River water bodies.
‘TW’ = Transitional water bodies.
‘LW’ = Lake water bodies.
‘CW’ = Coastal water bodies.
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWType/swTypeSpecificReferenceConditionsForBQEs
diagram SWMET_2022_p159.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type AllSomeNone_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether type-specific reference conditions have been established for this surface water type for all relevant BQEs:
‘All’: Reference conditions have been set for this type for all relevant BQEs
‘Some’: Reference conditions have been set for this type for some BQEs
‘None’: Reference conditions have not been set for this type for any BQEs
source <xs:element name="swTypeSpecificReferenceConditionsForBQEs" type="AllSomeNone_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether type-specific reference conditions have been established for this surface water type for all relevant BQEs:
‘All’: Reference conditions have been set for this type for all relevant BQEs
‘Some’: Reference conditions have been set for this type for some BQEs
‘None’: Reference conditions have not been set for this type for any BQEs
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWType/swTypeSpecificHyMoConditions
diagram SWMET_2022_p160.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type AllSomeNone_Enum
properties
isRef 0
annotation
documentation
: Required. Indicate whether type-specific hydromorphological conditions have been established for this surface water type for all relevant hydromorphological QEs.
‘All’: Hydromorphological conditions have been set for this type for all relevant hydromorphological QEs
‘Some’: Hydromorphological conditions have been set for this type for some hydromorphological QEs
‘None’: Hydromorphological conditions have not been set for this type for any hydromorphological QEs
source <xs:element name="swTypeSpecificHyMoConditions" type="AllSomeNone_Enum">
 
<xs:annotation>
   
<xs:documentation>: Required. Indicate whether type-specific hydromorphological conditions have been established for this surface water type for all relevant hydromorphological QEs.
‘All’: Hydromorphological conditions have been set for this type for all relevant hydromorphological QEs
‘Some’: Hydromorphological conditions have been set for this type for some hydromorphological QEs
‘None’: Hydromorphological conditions have not been set for this type for any hydromorphological QEs
</xs:documentation>
 
</xs:annotation>
</xs:element>

element SWType/swTypeSpecificPhysChemConditions
diagram SWMET_2022_p161.png
namespace http://dd.eionet.europa.eu/schemas/WFD2022
type AllSomeNone_Enum
properties
isRef 0
annotation
documentation
Required. Indicate whether type-specific reference conditions have been established for this surface water type for all relevant physico-chemical QEs:
‘All’: Physicochemical conditions have been set for this type for all relevant physico-chemical QEs
‘Some’: Physicochemical conditions have been set for this type for some physico-chemical QEs
‘None’: Physicochemical conditions have not been set for this type for any physico-chemical QEs
source <xs:element name="swTypeSpecificPhysChemConditions" type="AllSomeNone_Enum">
 
<xs:annotation>
   
<xs:documentation>Required. Indicate whether type-specific reference conditions have been established for this surface water type for all relevant physico-chemical QEs:
‘All’: Physicochemical conditions have been set for this type for all relevant physico-chemical QEs
‘Some’: Physicochemical conditions have been set for this type for some physico-chemical QEs
‘None’: Physicochemical conditions have not been set for this type for any physico-chemical QEs
</xs:documentation>
 
</xs:annotation>
</xs:element>

simpleType FeatureUniqueEUCodeType
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:string
facets
Kind Value annotation 
minLength 
maxLength 42 
pattern [A-Z]{2}[0-9A-Z]{1}([0-9A-Z_\-]{0,38}[0-9A-Z]{1}){0,1} 
annotation
documentation
2020 Type for EU code, allows up to 42 characters (unique code within MS prefixed with country ISO 2 character code
source <xs:simpleType name="FeatureUniqueEUCodeType">
 
<xs:annotation>
   
<xs:documentation>2020 Type for EU code, allows up to 42 characters (unique code within MS prefixed with country ISO 2 character code</xs:documentation>
 
</xs:annotation>
 
<xs:restriction base="xs:string">
   
<xs:minLength value="3"/>
   
<xs:maxLength value="42"/>
   
<xs:pattern value="[A-Z]{2}[0-9A-Z]{1}([0-9A-Z_\-]{0,38}[0-9A-Z]{1}){0,1}"/>
 
</xs:restriction>
</xs:simpleType>

simpleType NonNegativeDecimalType
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:decimal
facets
Kind Value annotation 
minInclusive 
annotation
documentation
Non negative decimal
source <xs:simpleType name="NonNegativeDecimalType">
 
<xs:annotation>
   
<xs:documentation>Non negative decimal</xs:documentation>
 
</xs:annotation>
 
<xs:restriction base="xs:decimal">
   
<xs:minInclusive value="0"/>
 
</xs:restriction>
</xs:simpleType>

simpleType PositiveDecimalType
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:decimal
facets
Kind Value annotation 
minExclusive 
annotation
documentation
Positive decimal
source <xs:simpleType name="PositiveDecimalType">
 
<xs:annotation>
   
<xs:documentation>Positive decimal</xs:documentation>
 
</xs:annotation>
 
<xs:restriction base="xs:decimal">
   
<xs:minExclusive value="0"/>
 
</xs:restriction>
</xs:simpleType>

simpleType String1000Type
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:string
facets
Kind Value annotation 
minLength 
maxLength 1000 
annotation
documentation
2020 String of up to 1000 characters
source <xs:simpleType name="String1000Type">
 
<xs:annotation>
   
<xs:documentation>2020 String of up to 1000 characters</xs:documentation>
 
</xs:annotation>
 
<xs:restriction base="xs:string">
   
<xs:minLength value="1"/>
   
<xs:maxLength value="1000"/>
 
</xs:restriction>
</xs:simpleType>

simpleType String100Type
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:string
facets
Kind Value annotation 
minLength 
maxLength 100 
annotation
documentation
2020 String of up to 100 characters
source <xs:simpleType name="String100Type">
 
<xs:annotation>
   
<xs:documentation>2020 String of up to 100 characters</xs:documentation>
 
</xs:annotation>
 
<xs:restriction base="xs:string">
   
<xs:minLength value="1"/>
   
<xs:maxLength value="100"/>
 
</xs:restriction>
</xs:simpleType>

simpleType String10Type
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:string
facets
Kind Value annotation 
minLength 
maxLength 10 
annotation
documentation
2020 String of up to 10 characters
source <xs:simpleType name="String10Type">
 
<xs:annotation>
   
<xs:documentation>2020 String of up to 10 characters</xs:documentation>
 
</xs:annotation>
 
<xs:restriction base="xs:string">
   
<xs:minLength value="1"/>
   
<xs:maxLength value="10"/>
 
</xs:restriction>
</xs:simpleType>

simpleType String20Type
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:string
facets
Kind Value annotation 
minLength 
maxLength 20 
annotation
documentation
2020 String of up to 20 characters
source <xs:simpleType name="String20Type">
 
<xs:annotation>
   
<xs:documentation>2020 String of up to 20 characters</xs:documentation>
 
</xs:annotation>
 
<xs:restriction base="xs:string">
   
<xs:minLength value="1"/>
   
<xs:maxLength value="20"/>
 
</xs:restriction>
</xs:simpleType>

simpleType String2500Type
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:string
facets
Kind Value annotation 
minLength 
maxLength 2500 
annotation
documentation
2020 String of up to 2500 characters
source <xs:simpleType name="String2500Type">
 
<xs:annotation>
   
<xs:documentation>2020 String of up to 2500 characters</xs:documentation>
 
</xs:annotation>
 
<xs:restriction base="xs:string">
   
<xs:minLength value="1"/>
   
<xs:maxLength value="2500"/>
 
</xs:restriction>
</xs:simpleType>

simpleType String250Type
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:string
facets
Kind Value annotation 
minLength 
maxLength 250 
annotation
documentation
2020 String of up to 250 characters
source <xs:simpleType name="String250Type">
 
<xs:annotation>
   
<xs:documentation>2020 String of up to 250 characters</xs:documentation>
 
</xs:annotation>
 
<xs:restriction base="xs:string">
   
<xs:minLength value="1"/>
   
<xs:maxLength value="250"/>
 
</xs:restriction>
</xs:simpleType>

simpleType String254Type
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:string
facets
Kind Value annotation 
minLength 
maxLength 254 
pattern (\p{L}|[0-9]){1}.{0,253} 
annotation
documentation
2020 String of up to 254 characters
source <xs:simpleType name="String254Type">
 
<xs:annotation>
   
<xs:documentation>2020 String of up to 254 characters</xs:documentation>
 
</xs:annotation>
 
<xs:restriction base="xs:string">
   
<xs:minLength value="1"/>
   
<xs:maxLength value="254"/>
   
<xs:pattern value="(\p{L}|[0-9]){1}.{0,253}"/>
 
</xs:restriction>
</xs:simpleType>

simpleType String25Type
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:string
facets
Kind Value annotation 
minLength 
maxLength 25 
annotation
documentation
2020 String of up to 25 characters
source <xs:simpleType name="String25Type">
 
<xs:annotation>
   
<xs:documentation>2020 String of up to 25 characters</xs:documentation>
 
</xs:annotation>
 
<xs:restriction base="xs:string">
   
<xs:minLength value="1"/>
   
<xs:maxLength value="25"/>
 
</xs:restriction>
</xs:simpleType>

simpleType String4000Type
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:string
facets
Kind Value annotation 
minLength 
maxLength 4000 
annotation
documentation
2020 String of up to 4000 characters
source <xs:simpleType name="String4000Type">
 
<xs:annotation>
   
<xs:documentation>2020 String of up to 4000 characters</xs:documentation>
 
</xs:annotation>
 
<xs:restriction base="xs:string">
   
<xs:minLength value="1"/>
   
<xs:maxLength value="4000"/>
 
</xs:restriction>
</xs:simpleType>

simpleType String50Type
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:string
facets
Kind Value annotation 
minLength 
maxLength 50 
annotation
documentation
2020 String of up to 50 characters
source <xs:simpleType name="String50Type">
 
<xs:annotation>
   
<xs:documentation>2020 String of up to 50 characters</xs:documentation>
 
</xs:annotation>
 
<xs:restriction base="xs:string">
   
<xs:minLength value="1"/>
   
<xs:maxLength value="50"/>
 
</xs:restriction>
</xs:simpleType>

simpleType URLType
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:string
facets
Kind Value annotation 
minLength 
maxLength 250 
pattern https?://.* 
annotation
documentation
URL string of up to 250 characters
source <xs:simpleType name="URLType">
 
<xs:annotation>
   
<xs:documentation>URL string of up to 250 characters</xs:documentation>
 
</xs:annotation>
 
<xs:restriction base="xs:string">
   
<xs:minLength value="1"/>
   
<xs:maxLength value="250"/>
   
<xs:pattern value="https?://.*"/>
 
</xs:restriction>
</xs:simpleType>

simpleType WiseDate
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:date
facets
Kind Value annotation 
pattern \d{4}-\d{2}-\d{2} 
source <xs:simpleType name="WiseDate">
 
<xs:restriction base="xs:date">
   
<xs:pattern value="\d{4}-\d{2}-\d{2}"/>
 
</xs:restriction>
</xs:simpleType>

simpleType WiseDateTime
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:dateTime
facets
Kind Value annotation 
pattern \d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2} 
source <xs:simpleType name="WiseDateTime">
 
<xs:restriction base="xs:dateTime">
   
<xs:pattern value="\d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}"/>
 
</xs:restriction>
</xs:simpleType>

simpleType WiseDateTimeType
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type union of (WiseDate, WiseDateTime, WiseYear, WiseYearMonth)
annotation
documentation
Dates must be reported using the ISO 8601 extended format:  YYYY-MM-DD, for days; YYYY-MM, for months; YYYY, for years. (If necessary, or convenient, time values can be reported. The ISO 8601 extended format for UTC time should be used.)
source <xs:simpleType name="WiseDateTimeType">
 
<xs:annotation>
   
<xs:documentation>Dates must be reported using the ISO 8601 extended format:  YYYY-MM-DD, for days; YYYY-MM, for months; YYYY, for years. (If necessary, or convenient, time values can be reported. The ISO 8601 extended format for UTC time should be used.)</xs:documentation>
 
</xs:annotation>
 
<xs:union memberTypes="WiseDate WiseDateTime WiseYear WiseYearMonth"/>
</xs:simpleType>

simpleType WiseLanguageCode_Enum
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:string
facets
Kind Value annotation 
enumeration alb 
enumeration arm 
enumeration baq 
enumeration bel 
enumeration bul 
enumeration cat 
enumeration cze 
enumeration dan 
enumeration dut 
enumeration eng 
enumeration est 
enumeration fao 
enumeration fin 
enumeration fre 
enumeration geo 
enumeration ger 
enumeration gle 
enumeration glg 
enumeration gre 
enumeration hrv 
enumeration hun 
enumeration ice 
enumeration ita 
enumeration lav 
enumeration lit 
enumeration ltz 
enumeration mac 
enumeration mis 
enumeration mlt 
enumeration nor 
enumeration pol 
enumeration por 
enumeration roh 
enumeration rum 
enumeration rus 
enumeration slo 
enumeration slv 
enumeration spa 
enumeration srp 
enumeration swe 
enumeration tur 
enumeration ukr 
source <xs:simpleType name="WiseLanguageCode_Enum">
 
<xs:restriction base="xs:string">
   
<xs:enumeration value="alb"/>
   
<xs:enumeration value="arm"/>
   
<xs:enumeration value="baq"/>
   
<xs:enumeration value="bel"/>
   
<xs:enumeration value="bul"/>
   
<xs:enumeration value="cat"/>
   
<xs:enumeration value="cze"/>
   
<xs:enumeration value="dan"/>
   
<xs:enumeration value="dut"/>
   
<xs:enumeration value="eng"/>
   
<xs:enumeration value="est"/>
   
<xs:enumeration value="fao"/>
   
<xs:enumeration value="fin"/>
   
<xs:enumeration value="fre"/>
   
<xs:enumeration value="geo"/>
   
<xs:enumeration value="ger"/>
   
<xs:enumeration value="gle"/>
   
<xs:enumeration value="glg"/>
   
<xs:enumeration value="gre"/>
   
<xs:enumeration value="hrv"/>
   
<xs:enumeration value="hun"/>
   
<xs:enumeration value="ice"/>
   
<xs:enumeration value="ita"/>
   
<xs:enumeration value="lav"/>
   
<xs:enumeration value="lit"/>
   
<xs:enumeration value="ltz"/>
   
<xs:enumeration value="mac"/>
   
<xs:enumeration value="mis"/>
   
<xs:enumeration value="mlt"/>
   
<xs:enumeration value="nor"/>
   
<xs:enumeration value="pol"/>
   
<xs:enumeration value="por"/>
   
<xs:enumeration value="roh"/>
   
<xs:enumeration value="rum"/>
   
<xs:enumeration value="rus"/>
   
<xs:enumeration value="slo"/>
   
<xs:enumeration value="slv"/>
   
<xs:enumeration value="spa"/>
   
<xs:enumeration value="srp"/>
   
<xs:enumeration value="swe"/>
   
<xs:enumeration value="tur"/>
   
<xs:enumeration value="ukr"/>
 
</xs:restriction>
</xs:simpleType>

simpleType WiseYear
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:gYear
facets
Kind Value annotation 
pattern \d{4} 
source <xs:simpleType name="WiseYear">
 
<xs:restriction base="xs:gYear">
   
<xs:pattern value="\d{4}"/>
 
</xs:restriction>
</xs:simpleType>

simpleType WiseYearMonth
namespace http://dd.eionet.europa.eu/schemas/WFD2022/wfdcommon
type restriction of xs:gYearMonth
facets
Kind Value annotation 
pattern \d{4}-\d{2} 
source <xs:simpleType name="WiseYearMonth">
 
<xs:restriction base="xs:gYearMonth">
   
<xs:pattern value="\d{4}-\d{2}"/>
 
</xs:restriction>
</xs:simpleType>


XML Schema documentation generated by
XMLSpy Schema Editor http://www.altova.com/xmlspy