WFD Template Definition
Template short name: WFD_WBEXEMPT, Name: WFD_WaterBodyExemptions, Geometry type: None
No.
Attribute
Attribute short name
Definition
Type
Obligation
Attribute values
Origin
0.0
TEMPLATE
Vorgegebener Schablonenname, schreibgeschützt
string (24)
Mandatory
1.1
EU_CD_WB
Internationaler Schluessel des WaterBody.
string (42)
Mandatory, primary key
1.2
WB_CAT
Wasserkörperkategorie
string (2)
Mandatory, primary key
2.1
ECOEXTYPE
Required. Report which type(s) of exemption(s) apply if good ecological status or potential is not expected to be achieved by 2015. More than one exemption may apply to a surface water body. In case SurfaceWaterCategory is 'TeW', 'No exemption' should be reported and interpreted as 'Not relevant'. Quality checks: Element check: A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: 'No exemption' is not compatible with any other option. Prüfung: Ist ECO_POT oder ECO_STAT des referenzierten WK nicht gut, so ist der Wert 'No exemption' nicht zulässig. Eine oder mehrere andere Optionen müssen gewählt werden. Within-schema check: if SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
2.2
ECOEXPRESS
Conditional. If any Article 4(4), Article 4(5) and/or Article 4(7) exemptions apply to this surface water body for ecological status, report the significant pressure(s) that are causing failure in order to justify the exemption(s). Quality checks: Conditional check: If SwEcologicalExemptionType is not 'No exemption', at least one significant pressure type must be selected from the enumeration list (the options 'No significant pressure types' and 'Not relevant' are not valid).
string (254)
Conditional, mandatory for SwEcological​ExemptionType <> 'No exemption'
2.3
QUAEXTYPE
Report which type(s) of exemption(s) apply if good quantitative status is not expected to be achieved by 2015. More than one exemption may apply to a groundwater body. Quality checks: Within-schema check: 'No exemption' is not compatible with any other option. Prüfung: Ist QUANT_STAT des referenzierten WK nicht gut, so ist der Wert 'No exemption' nicht zulässig. Eine oder mehrere andere Optionen müssen gewählt werden.
string (254)
Conditional, mandatory for WB_CAT = "GW"
2.4
QUAEXPRESS
If any Article 4(4), Article 4(5), Article 4(6) and/or Article 4(7) exemptions apply to this groundwater body for quantitative status, report the significant pressure(s) that are causing failure in order to justify the exemption(s). Quality checks: Conditional check: If GwQuantitativeExemptionType is not 'No exemption', at least one significant pressure type must be selected from the enumeration list. The options 'No significant pressure types' and 'Not relevant' are not valid.
string (254)
Conditional, mandatory for GwQuantitative​ExemptionType <> 'No exemption'
4.0
QE11TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.01
QE12TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.02
QE121TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.03
QE122TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.04
QE123TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.05
QE124TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.06
QE13TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.07
QE14TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.08
QE21TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.09
QE22TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.10
QE23TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.11
QE311TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.12
QE312TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.13
QE313TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.14
QE314TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.15
QE315TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.16
QE3161TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.17
QE3162TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
4.18
QE33TYP
Required. Report which type(s) of exemption(s) apply to this surface water body and QE. More than one exemption may apply. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected, which should be interpreted as 'Not relevant'. Quality check: Element check: QEXEcologicalExemptionType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: the option 'No exemption' is not compatible with any other. If SurfaceWaterCategory is 'TeW' then 'No exemption' must be selected.
string (254)
Conditional, mandatory for WB_CAT = "RW" or WB_CAT = "LW" or WB_CAT = "TW" or WB_CAT = "CW"
Kat.III
5.0
ENOBJDT
Wird der ökologische bzw. quantitative Zustand bis 2015 nicht erreicht, so ist hier das geplante Datum der Zielerreichung anzugeben.
string (2)
Conditional, mandatory for Land_cd = "DE%" and ​ECO/POT/QUANT​_STAT > 2
SW, GW
5.1
ENOBJDT_CH
Wird der chemische Zustand bis 2015 nicht erreicht, so ist hier das geplante Datum der Zielerreichung anzugeben.
string (2)
Conditional, mandatory for Land_cd = "DE%" and CHEM_STAT > 2
SW, GW
7.1
WA_CD
Kennung fuer das Bearbeitunsgebiet bzw. den Koordinierungsraum. Der Code besteht aus einer vierstelligen Numerierung fuer das Bearbeitungsgebiet bzw. den Koordinierungsraum.
string (10)
Mandatory
7.2
RBD_CD
Kennung für die Flussgebietseinheit. Der Code besteht aus einer vierstelligen Numerierung für die Flussgebietseinheit.
string (4)
Mandatory
7.3
LAND_CD
Der CountryStateCode wird in Anlehnung an die Regelungen der DIN EN ISO 3166-1 und DIN ISO 3166-2 aus zwei Alpha-2 Schlüsseln zusammen gesetzt. Der erste Teil des Schlüssels entspricht dem MemberStateCode, der zweite Schlüsselbestandteil steht für die Verwaltungseinheiten (Bundesland). Für Deutschland sind diese Verwaltungseinheiten vorgegeben. Für andere Länder ist der Alpha-2 Schlüssel (XX) frei wählbar.
string (4)
Mandatory
7.4
DELIVERY
Datum der Datenbereitstellung
date (8)
Mandatory
YYYYMMDD
7.5
METADATA
Der Name der Metadatendatei ist abhängig vom hier erfassten Gebiet. Er kann auf vier verschiedene Arten gebildet werden. Er setzt sich zusammen aus der Kurzbezeichnung für die Schablone, dem CountryStateCode, dem WorkAreaCode oder dem RiverBasinDistrictCode und wird um die Dateinamenserweiterung XML ergänzt. Alle Angaben sind in Grossbuchstaben auszuführen. Schema: <TemplateShortName>_ <CountryStateCode>_ <WorkAreaCode>.XML oder <TemplateShortName>_ <CountryStateCode>_ <RiverBasinDistrictCode>.XML oder <TemplateShortName>_ <CountryStateCode>.XML oder <TemplateShortName>_ <WorkAreaCode>.XML Beispiel: für Nordrhein-Westfalen für den Niederrhein: COMPATH_DENW_2800.XML für Nordrhein-Westfalen für den Rhein COMPATH_DENW_2000.XML für Nordrhein-Westfalen COMPATH_DENW.XML für das Gesamtgebiet Niederrhein COMPATH_2800.XML
string (255)
Mandatory
7.6
URL
URL einer optionalen Web-Seite zur objektbezogenen Einbindung eigener internetbasierter Informationsquellen. Der URL sollte stets in der Form “http://“-prefix aufgebaut werden.
string (255)
Optional
Bundesanstalt für Gewässerkunde : Stand: 10.05.2019 - 18:39:05