WFD Template Definition
Template short name: WFD_TWBODYCHARACTER, Name: WFD_TransitionalWatersCharacteristics, Geometry type: None
No.
Attribute
Attribute short name
Definition
Type
Obligation
Attribute values
Origin
0.0
TEMPLATE
Vorgegebener Schablonenname, schreibgeschützt.
string (24)
Mandatory
Kat.I
1.0
NAMETEXT
Name des Wasserkörpers.
string (250)
Mandatory
Kat.I
1.1
TEXTINTERN
Internationaler Name des Wasserkörpers.
string (250)
Optional
Kat.I
1.2
EU_CD_TW
Internationaler Schlüssel für TransitionalWaterBody Der Schlüssel setzt sich zusammen aus dem MemberStateCode, dem FeatureClassCode und dem nationalen Schlüssel (siehe Beschreibung zu MS_CD_TW). Schema: <MemberStateCode>_ <FeatureClassCode>_ <MS_CD_TW>
string (42)
Mandatory, primary key
Kat.I
1.3
WB_PREDEC
Ist der Wasserkörper seit der letzten Berichterstattung zum 1.,2., usw. BWP gleichgeblieben, soll hier der gleiche Code wie in Feld EU_CD_TW angegeben werden. Sofern der Wasserkörper seit der letzten Berichterstattung zum 1.,2., usw. BWP geändert wurde, soll hier der bzw. die letzte(n) berichtete(n) Code(s) (EU_CD_TW) des/der geänderten Wasserkörper(s) angegeben werden. Mehrfachnennungen sind möglich kommasepariert ohne Leerstellen. Fehlwert: -9999. Die Nennungen sind abhängig von Attribut EVOLUTIONT.
string (255)
Optional
Kat.I
1.5
EVOLUTIONT
Angabe der Änderung des Wasserkörpers. Detailinformation: Type of event that produced or modified the version of the object being reported. This attribute is required to explicitly report changes and update the current status of the object in the Water Information System for Europe. -- Further information -- See the GIS guidance for additional information on the management of life-cycle information.
string (33)
Mandatory
Kat.I
2.0
RBD_CD
Kennung fuer die Flussgebietseinheit. Der Code besteht aus einer vierstelligen Numerierung fuer die Flussgebietseinheit.
string (4)
Mandatory
Kat.I
2.1
WA_CD
Kennung fuer das Bearbeitunsgebiet bzw. den Koordinierungsraum. Der Code besteht aus einer vierstelligen Numerierung fuer das Bearbeitungsgebiet bzw. den Koordinierungsraum.
string (10)
Mandatory
Kat.I
2.2
LAND_CD
Der CountryStateCode wird in Anlehnung an die Regelungen der DIN EN ISO 3166-1 und DIN ISO 3166-2 aus zwei Alpha-2 Schluesseln zusammen gesetzt. Der erste Teil des Schluessels entspricht dem CountryCode, der zweite Schluesselbestandteil steht fuer die Verwaltungseinheiten (Bundesland). Fuer Deutschland sind diese Verwaltungseinheiten vorgegeben. Fuer andere Laender ist der Alpha-2 Schluessel (XX) frei waehlbar.
string (4)
Mandatory, primary key
Kat.I
2.4
METADATA
Der Name der Metadatendatei ist abhaengig vom hier erfassten Gebiet. Er kann auf vier verschiedene Arten gebildet werden. Er setzt sich zusammen aus der Kurzbezeichnung fuer die Schablone, dem CountryStateCode, dem WorkAreaCode oder dem RiverBasinDistrictCode und wird um die Dateinamenserweiterung XML ergaenzt. Alle Angaben sind in Grossbuchstaben auszufuehren.Schema: <TemplateShortName>_ <CountryStateCode>_ <WorkAreaCode>.XML or <TemplateShortName>_ <CountryStateCode>_ <RiverBasinDistrictCode>.XML or <TemplateShortName>_ <CountryStateCode>.XML or <TemplateShortName>_ <WorkAreaCode>.XML Beispiel: fuer Nordrhein-Westfalen fuer den Niederrhein: COMPATH_DENW_2800.XML fuer Nordrhein-Westfalen fuer den Rhein COMPATH_DENW_2000.XML fuer Nordrhein-Westfalen: COMPATH_DENW.XML fuer das Gesamtgebiet Niederrhein: COMPATH_2800.XML
string (255)
Mandatory
Kat.I
2.5
URL
URL einer optionalen Web-Seite zur objektbezogenen Einbindung eigener internetbasierter Informationsquellen. Der URL sollte stets in der Form http://-prefix aufgebaut werden.
string (255)
Optional
Kat.I
2.6
INS_WHEN
Erstellungsdatum des Datensatzes
date (8)
Mandatory
YYYYMMDD
Kat.I
2.7
INS_BY
Ansprechpartner
string (15)
Mandatory
Kat.I
3.1
TY_CD_TW
Beschreibung der Typen nach WRRL-Anhang II (1.2.3) (Für Deutschland gilt: Sofern Empfehlungen in der LAWA-Arbeitshilfe zur WRRL ausgesprochen wurden, sollte diesen gefolgt werden. z.B. N0 = tidenbeeinflusstes Ästuar der Flachlandküste)
string (5)
Conditional, mandatory for LAND_CD like "DE%"
Kat.I
3.11
MODIFIED
Angabe, ob der Wasserkörper erheblich verändert ist
string (1)
Mandatory
Kat.I
3.13
ARTIFICIAL
Angabe, ob Wasserköper künstlich ist
string (1)
Mandatory
Kat.I
4.0
SIGPR
Required. Indicate the significant pressure type(s) from the enumeration list. If a combination of pressure-driver is not significant on its own but it is in combination with others, select all the relevant pressures of that type that are present which make the overall pressure significant (e.g. if abstraction from industry or agriculture is not relevant on their own but they are relevant in combination, select both). If the ecological status or potential of the surface water body is less than good, at least one significant pressure type must be reported. The option 'No significant pressure types' is not valid. If the chemical status of the surface water body is less than good, at least one significant pressure type must be reported. The option 'No significant pressure types' is not valid. Quality checks: Within-schema check: the option 'No significant pressure types' is not compatible with any other. Within-schema check: the option 'Not relevant' is not compatible with any other option and can be selected if and only if surfaceWaterBodyCategory is 'TeW' (not compatible with any other surfaceWaterBodyCategory). Within-schema check: If SWB/SurfaceWaterBody/swEcologicalStatusOrPotentialValue is '3', '4' or '5', at least one significant pressure type must be selected from the enumeration list (can include option '8 Unknown pressures'). The option 'No significant pressure types' is not a valid selection. Within-schema check: If SWB/SurfaceWaterBody/swChemicalStatusValue is '3', at least one significant pressure type must be selected from the enumeration list (can include '8 Unknown pressures'). The option 'No significant pressure types' is not a valid selection. Mehrfachnennungen sind möglich, kommasepariert ohne Leerstellen.
string (254)
Conditional, mandatory for Land_cd like 'DE%'
Kat.I
4.1
SIGPRO
Conditional. If '7 Other anthropogenic pressures' is selected from the enumeration list and reported under swSignificantPressureType, provide details of any other anthropogenic pressure types which are relevant in this element. This element should only be reported if the pressure type is not included in the enumeration list under swSignificantPressureType. Quality checks: Conditional check: Report if '7 Other anthropogenic pressures' is selected from the enumeration list under swSignificantPressureType.
string ​(1000)
Conditional, mandatory for '7 Other anthropogenic pressures' = selected from the enumeration list under SwSignificant​PressureType.
Kat.I
4.2
IMPACT
Angaben zu den Auswirkungen der Wasserkoerperbelastungen. Mehrfachnennungen sind möglich, kommasepariert ohne Leerstellen.
string (255)
Conditional, mandatory for Land_cd like "DE%"
Kat.I
4.4
IMPACT_OTH
If 'Other Significant Impacts' is selected from the enumeration list under Impact, provide details of any other impact types which are relevant in this element. This element should only be reported if the impact type is not included in the enumeration list under Impact. Quality checks: Conditional check: Report if 'Other Significant Impacts' is selected from the enumeration list under Impact.
string ​(1000)
Conditional, mandatory for 'Other Significant Impacts' selected from the enumeration list under swSignificantImpact​Type
Kat.I
5.1
RISK_CHEM
Statusmeldung im Sinne der Risikoabschätzung für den chemischen Zustand
string (1)
Mandatory
5.2
RISK_ECPO
Statusmeldung im Sinne der Risikoabschätzung für das ökologische Potential
string (1)
Conditional, mandatory for ARTIFICIAL = "Y" or MODIFIED = "Y"
5.3
RISK_ECST
Statusmeldung im Sinne der Risikoabschätzung für den ökologischen Zustand
string (1)
Conditional, mandatory for ARTIFICIAL = "N" and MODIFIED = "N"
5.4
RISK_DATE
Gültigkeitsdatum der Statusmeldung zur Risikoabschätzung nach WRRL Artikel 5 und Anhang II (1.5)
date (8)
Optional
YYYYMMDD
5.5
RISK_TOTAL
Abgeleitet aus den Angaben der Attribute RISK_CHEM und RISK_ECST bzw. RISK_ECPO. Der "schlechtere" Wert bestimmt den Wert von RISK_TOTAL.
string (1)
Optional
6.0
BEGINLIFE
Date and time at which this version of the spatial object was inserted or changed in the spatial data set. -- Description -- NOTE This date is recorded to enable the generation of change only update files. -- Guidance -- Conditional. Data Providers should report this information, if available. Data Providers must report this information if the endLifespanVersion value is reported.
date (8)
Conditional, mandatory for endLifespanVersion is not null
YYYYMMDD
Kat.I
6.1
ENDLIFE
Date and time at which this version of the spatial object was superseded or retired in the spatial data set. -- Description -- NOTE This date is recorded primarily for those systems which "close" an entry in the spatial data set in the event of an attribute change. -- Guidance -- Optional. If the version of the spatial object being reported is still unchanged in the national datasets, then Data Providers are not required to provide this information. For example, Data Providers reporting under WFD 2016 should report the current version of the spatial object: therefore the endLifespanVersion attribute is not required. This attribute is kept in the data model to allow future updates and support the traceability of changes to objects previously reported.
date (8)
Optional
YYYYMMDD
Kat.I
6.2
DESIGBEGIN
time period defining when the management, restriction or regulation zone was legally designated or became effective in the real world.
date (8)
Mandatory
YYYYMMDD
Kat.I
6.4
HMWB_PA
For HMWBs only, report the physical alteration that has resulted in the designation of the surface water body as a HMWB. In the context of designation, physical alterations mean any significant alterations that have resulted in substantial changes to the hydromorphology of a surface water body such that the surface water body is substantially changed in character. In general, these hydromorphological characteristics are long-term and alter both the morphological and hydrological characteristics. Further guidance on the terms is found under the Glossary section below. Quality checks: Conditional check: Report if MODIFIED is ‘Y’.
string (254)
Conditional, mandatory for MODIFIED = 'Y'
Kat.I
6.5
HMWB_WU
For HMWBs only, report the water use for which it has been designated. ‘Wider environment’ can refer to designation in order to maintain nature protected areas and also archaeological sites and patrimony (see CIS Guidance Document No. 4 – Identification and Designation of Heavily Modified and Artificial Water Bodies ). Quality checks: Element check: A valid option must be selected from the enumeration list. More than one option can be selected. Conditional check: Report if MODIFIED is ‘Y’.
string (254)
Conditional, mandatory for MODIFIED = 'Y'
Kat.I
6.7
INT_CAL_TP
If the surface water body type corresponds with an intercalibration type, report the intercalibration type code (not name). The intercalibration type reported in this element must be appropriate to the surface water body’s Category. If there is no corresponding intercalibration type, select ‘Not relevant’. Report 'Not relevant' for territorial waters. Quality checks: Element check: SurfaceWaterBodyIntercalibrationType must be reported. A valid option must be selected from the enumeration list. More than one option can be selected. Within-schema check: 'Not relevant' should be reported if SurfaceWaterBodyCategory is 'TeW'. Cross-schema check: SurfaceWaterBodyIntercalibrationType must be consistent with the codes reported in SWMET/IntercalibrationType
string (254)
Mandatory
Kat.I
7.0
TRANSB
Indicate whether the surface water body reaches the national border, extends across it or is shared with other countries (i.e. the river is the national border). Not relevant for territorial waters. Quality checks: Element check: Transboundary must be reported. A valid option must be selected from the enumeration list. Only one option can be selected. Within-schema check: 'No' should be reported if SurfaceWaterBodyCategory is 'TeW'.
string (1)
Mandatory
Kat.I
Bundesanstalt für Gewässerkunde : Stand: 10.05.2019 - 18:39:05